Printer Friendly Version

SS - SQUARE NON-TAPERED STEEL


[Pole Shaft]
The pole shaft is one piece construction, being fabricated from a weldable grade carbon steel structural tubing which has a uniform wall thickness of 11 gauge (0.1196"), 7 gauge (0.1793"), or 3 gauge (0.2391"). The pole shaft material shall conform to ASTM A-500 Grade C with a minimum yield strength of 50,000 psi. The pole shaft has a full length longitudinal resistance weld and is uniformly square in cross-section with flat sides, small corner radii and excellent torsional properties.


[Anchor Bolts]
Anchor bolts are fabricated from commercial quality hot rolled carbon steel bar that meets or exceeds a minimum yield strength of 55,000 psi. Four properly sized anchor bolts, each with two regular hex nuts and washers, are furnished and shipped with all poles unless otherwise specified. Anchor bolts shall have the threaded end galvanized a minimum of 8 inches in accordance with ASTM A-153. Fully galvanized anchor bolts are available upon request.


[Base Plate]
The anchor base is fabricated from structural quality hot rolled carbon steel plate that meets or exceeds a minimum yield strength of 36,000 psi. The anchor base telescopes the pole shaft and is circumferentially welded top and bottom. All welds are performed in accordance with the American Welding Society specification AWS D1.1, latest edition.


[Handhole]
An oval reinforced gasketed handhole, having a nominal 3" x 5" or 4" x 6-1/2" inside opening, located 1'-6" above base, is standard on all poles. Optional 5" x 8" and 4" x 10" handholes are available. A grounding provision is located inside the handhole ring.


[Finish]
All exterior metal surfaces are mechanically cleaned to remove all oxides and contaminants prior to coating. The standard finish is a polyester thermosetting powder coating applied to the surface of the substrate to a minimum of 3 mils for all color finishes. Galvanizing is available upon request.













FINISH


   P - Primer
BK - Black Finish Color
BZ - Bronze Finish Color
GN - Green Finish Color
GY - Gray Finish Color
LA - Dark Natural Aluminum
LM - Natural Aluminum
G - Hot Dipped Galvanized
WH - White Finish Color
CT - Custom Color
G/BK - Black over Galvanized
G/BZ - Bronze over Galvanized
G/GN - Green over Galvanized
G/GY - Gray over Galvanized
G/LM - Natural Aluminum over galvanized
G/WH - White over Galvanized
G/CT - Custom over Galvanized



MOUNTING DESIGNATIONS


   OT - Open Top
PC - Pole Cap
2 - 2 3/8” OD Tenon
3 - 2 7/8” OD Tenon
3.5 - 3 1/2” OD Tenon
4 - 4” OD x 6” Tenon
DM - Drilled Mount
DM10 - Drilled for 1 Luminaire
DM29 - Drilled for 2 Luminaires at 90º
DM28 - Drilled for 2 Luminaires at 180º
DM39 - Drilled for 3 Luminaires at 90º
DM49 - Drilled for 4 Luminaires at 90º
WP - Wood Pole


* Standard location for DM10 is 90º to the right of the handhole.


OPTIONS


   XHH - Extra Handhole
WPRP - Festoon Opening
CPL - Threaded Coupling
NPL - Threaded Nipple
VDI - Vibration Damper Internal
BC - Base Cover
LAB - Less Anchor Bolt
EMB - Embedded Pole




SORT THE LIST BELOW BASED ON YOUR PREFERENCE BY CLICKING THE COLUMN TITLE

Height
(ft.)
Catalog Number Pole Shaft
(in.) x (ft.)
Shaft
Gauge
Bolt Circle
(in.)
Anchor Bolt
(in.) x (in.) x (in.)
Handhole Size
(in.)
80 MPH
(ft.²)
90 MPH
(ft.²)
100 MPH
(ft.²)
Ship Wt.
(lbs)
Select
10SS40007104.0 x 10.0780.75 x 30 x 33 x 5554435130Configure
12SS40007124.0 x 12.0780.75 x 30 x 33 x 5473729150Configure
14SS40007144.0 x 14.0780.75 x 30 x 33 x 5403124170Configure
15SS40007154.0 x 15.0780.75 x 30 x 33 x 5302419172Configure
16SS40007164.0 x 16.0780.75 x 30 x 33 x 5272016210Configure
18SS40007184.0 x 18.0780.75 x 30 x 33 x 5272016210Configure
20SS40007204.0 x 20.0780.75 x 30 x 33 x 5191511219Configure
22SS40007224.0 x 22.0780.75 x 30 x 33 x 51286266Configure
24SS40007244.0 x 24.0780.75 x 30 x 33 x 51286266Configure
25SS40007254.0 x 25.0780.75 x 30 x 33 x 51286266Configure
26SS40007264.0 x 26.0780.75 x 30 x 33 x 5641312Configure
28SS40007284.0 x 28.0780.75 x 30 x 33 x 5641312Configure
30SS40007304.0 x 30.0780.75 x 30 x 33 x 5641312Configure
10SS40011104.0 x 10.01180.75 x 17 x 33 x 542332787Configure
12SS40011124.0 x 12.01180.75 x 17 x 33 x 5332621100Configure
14SS40011144.0 x 14.01180.75 x 17 x 33 x 5272117113Configure
15SS40011154.0 x 15.01180.75 x 17 x 33 x 5201612119Configure
16SS40011164.0 x 16.01180.75 x 17 x 33 x 5181411125Configure
18SS40011184.0 x 18.01180.75 x 17 x 33 x 515118138Configure
20SS40011204.0 x 20.01180.75 x 17 x 33 x 51296151Configure
22SS40011224.0 x 22.01180.75 x 17 x 33 x 5642182Configure
25SS40011254.0 x 25.01180.75 x 17 x 33 x 5642182Configure
14SS50007145.0 x 14.07111.00 x 36 x 43 x 5655241242Configure
15SS50007155.0 x 15.07111.00 x 36 x 43 x 5594637254Configure
16SS50007165.0 x 16.07111.00 x 36 x 43 x 5544334266Configure
18SS50007185.0 x 18.07111.00 x 36 x 43 x 5463628291Configure
20SS50007205.0 x 20.07111.00 x 36 x 43 x 5352721313Configure
22SS50007225.0 x 22.07111.00 x 36 x 43 x 5302317337Configure
24SS50007245.0 x 24.07111.00 x 36 x 43 x 5251914361Configure
25SS50007255.0 x 25.07111.00 x 36 x 43 x 5231713373Configure
26SS50007265.0 x 26.07111.00 x 36 x 43 x 5211611384Configure
28SS50007285.0 x 28.07111.00 x 36 x 43 x 518139408Configure
30SS50007305.0 x 30.07111.00 x 36 x 43 x 51395432Configure
35SS50007355.0 x 35.07111.00 x 36 x 43 x 5731491Configure
10SS50011105.0 x 10.011111.00 x 36 x 43 x 5584434151Configure
12SS50011125.0 x 12.011111.00 x 36 x 43 x 5493829168Configure
14SS50011145.0 x 14.011111.00 x 36 x 43 x 5403023184Configure
15SS50011155.0 x 15.011111.00 x 36 x 43 x 5362721192Configure
16SS50011165.0 x 16.011111.00 x 36 x 43 x 5332518201Configure
18SS50011185.0 x 18.011111.00 x 36 x 43 x 5271915218Configure
20SS50011205.0 x 20.011111.00 x 36 x 43 x 5221612235Configure
22SS50011225.0 x 22.011111.00 x 36 x 43 x 518139252Configure
24SS50011245.0 x 24.011111.00 x 36 x 43 x 515107268Configure
25SS50011255.0 x 25.011111.00 x 36 x 43 x 51396276Configure
26SS50011265.0 x 26.011111.00 x 36 x 43 x 51285284Configure
28SS50011285.0 x 28.011111.00 x 36 x 43 x 5963300Configure
30SS50011305.0 x 30.011111.00 x 36 x 43 x 5631315Configure
30SS60003306.0 x 30.03121.00 x 36 x 43 x 5342518645Configure
35SS60003356.0 x 35.03121.00 x 36 x 43 x 519138739Configure
39SS60003396.0 x 39.03121.00 x 36 x 43 x 51373814Configure
20SS60007206.0 x 20.0711.51.00 x 36 x 43 x 5564233368Configure
22SS60007226.0 x 22.0711.51.00 x 36 x 43 x 5493728398Configure
24SS60007246.0 x 24.0711.51.00 x 36 x 43 x 5423123428Configure
25SS60007256.0 x 25.0711.51.00 x 36 x 43 x 5392821443Configure
26SS60007266.0 x 26.0711.51.00 x 36 x 43 x 5352518457Configure
28SS60007286.0 x 28.0711.51.00 x 36 x 43 x 5302115487Configure
30SS60007306.0 x 30.0711.51.00 x 36 x 43 x 5271914512Configure
35SS60007356.0 x 35.0711.51.00 x 36 x 43 x 51595584Configure
39SS60007396.0 x 39.0711.51.00 x 36 x 43 x 5940.6642Configure