| 					
							
							| 
 [Pole Shaft]
 Extruded Fluted Aluminum, 6063-T6     Access Door: Located in base
 
 |  | 
 [Anchor Bolts]
 Anchor bolts are fabricated from commercial quality hot rolled carbon steel bar that meets or exceeds a minimum yield strength of 55,000 psi. Four properly sized anchor bolts, each with two regular hex nuts and washers, are furnished and shipped with all poles unless otherwise specified.
 
 |  | 
 [Finish]
 All exterior metal surfaces are mechanically cleaned to remove all oxides and contaminants prior to coating.  The standard finish is a polyester thermosetting powder coating applied to the surface of the substrate to a minimum of 3 mils for all color finishes.
 
 |  
 
  
 
  
 
 
   
 
 
 
 
 | 
 
 FINISH
 
 
 
 |  | P - Primer |  | BK - Black Finish Color |  | BZ - Bronze Finish Color |  | GN - Green Finish Color |  | GY - Gray Finish Color |  | LA - Dark Natural Aluminum |  | LM - Natural Aluminum |  | WT - White Finish Color |  | CT - Custom Finish | 
 
 
 MOUNTING DESIGNATIONS
 
 
 
 |  | 3 - 3" x 2 1/2" TENON |  | 4 - 4" x 6" TENON |  | SM2090 - For 2 Luminaire @ 90º * |  | SM10 - For 1 Luminaire |  | SM2180 - For 2 Luminaire @ 180º * |  | SM3090 - For 3 Luminaire @ 90º * |  | SM3120 - For 3 Luminaire @ 120º * |  | SM4090 - For 4 Luminaire @ 90º * | 
 
 * Standard location for DM10 is 90º to the right of the handhole.
 
 
 OPTIONS
 
 
 
 |  | OT - Open Top |  | PC - Pole Cap |  | XHH - Extra Handhole |  | WPRP - Festoon Opening |  | CPL - Threaded Coupling |  | NPL - Threaded Nipple |  | VDP - Vibration Damper Pads |  | LAB - Less Anchor Bolt | 
 
 
 BASE STYLES
 
 
 
 |  | GA15 - Georgetown 15" Round |  | PA10 - Philadelphia 10" x 10" octagonal |  | WA17 - Washington 17" Round |  | MA17 - Manhattan 17" Round |  | WA13 - Washington 13" Round | 
 
 
 
 
 |