[Pole Shaft]
Extruded Fluted Aluminum, 6063-T6 Access Door: Located in base
|
[Anchor Bolts]
Anchor bolts are fabricated from commercial quality hot rolled carbon steel bar that meets or exceeds a minimum yield strength of 55,000 psi. Four properly sized anchor bolts, each with two regular hex nuts and washers, are furnished and shipped with all poles unless otherwise specified.
|
[Finish]
All exterior metal surfaces are mechanically cleaned to remove all oxides and contaminants prior to coating. The standard finish is a polyester thermosetting powder coating applied to the surface of the substrate to a minimum of 3 mils for all color finishes.
|
|
FINISH
| P - Primer | BK - Black Finish Color | BZ - Bronze Finish Color | GN - Green Finish Color | GY - Gray Finish Color | LA - Dark Natural Aluminum | LM - Natural Aluminum | WT - White Finish Color | CT - Custom Finish |
MOUNTING DESIGNATIONS
| 3 - 3" x 2 1/2" TENON | 4 - 4" x 6" TENON | SM2090 - For 2 Luminaire @ 90º * | SM10 - For 1 Luminaire | SM2180 - For 2 Luminaire @ 180º * | SM3090 - For 3 Luminaire @ 90º * | SM3120 - For 3 Luminaire @ 120º * | SM4090 - For 4 Luminaire @ 90º * |
* Standard location for DM10 is 90º to the right of the handhole.
OPTIONS
| OT - Open Top | PC - Pole Cap | XHH - Extra Handhole | WPRP - Festoon Opening | CPL - Threaded Coupling | NPL - Threaded Nipple | VDP - Vibration Damper Pads | LAB - Less Anchor Bolt |
BASE STYLES
| GA15 - Georgetown 15" Round | PA10 - Philadelphia 10" x 10" octagonal | WA17 - Washington 17" Round | MA17 - Manhattan 17" Round | WA13 - Washington 13" Round |
|