|
| Square aluminum Pole
|
 |
Pole Shaft
The pole shaft is a seamless 6063-T6 aluminum alloy extrusion having a uniform wall thickness of 0.250", 0.188", 0.156" or 0.125". The sides of the shaft may be drilled for mounting luminaire fixtures. All aluminum alloys shall comply with metallurgical and mechanical properties set forth in the Aluminum Association Standards.
|
Base Plate
An oval reinforced gasketed handhole, having a nominal 3" x 5" inside opening, located 1' - 6" above base, is standard on all poles. A grounding provision is located inside the handhole ring.
|
Anchor Bolts
Anchor bolts are fabricated from commercial quality hot rolled carbon steel bar that meets or exceeds a minimum yield strength of 55,000 psi. Four properly sized anchor bolts, each with two regular hex nuts and washers, are furnished and shipped with all poles unless otherwise specified.
|
Handhole
An oval reinforced gasketed handhole, having a nominal 3" x 5" inside opening, located 1' - 6" above base, is standard on all poles. A grounding provision is located inside the handhole ring.
|
Finishes
The Standard Finish is a polyester thermosetting powder coating applied to the surface of the substrate to a minimum of 3 mils for all color finishes.
|
HOW TO ORDER
When ordering KW lighting standards, mounting adaptors and accessories, be sure to specify the complete catalog number. Our catalog numbers reflect the precise specifications of the item ordered to ensure our
customers will receive the product which meets their exact requirements.
The following explanation of the catalog numbers will be helpful in placing orders:
|
CATALOG LOGIC - ORDERING SAMPLE
|
|
Catalog Number
|
Nominal
Height
|
Pole Shaft
|
Thickness
|
Handhole
Size
|
Anchor Bolt
|
Bolt
Circle
|
80
MPH
|
90
MPH
|
100
MPH
|
110
MPH
|
Ship
WT.
|
Select
|
| SAP18-4.0-11 | 18 | 4.0 x 18.0 | 11 | 3 x 5 | 0.75 x 17 x 3 | 9 | 4 | 3 | 2 | 0 | 52 | Configure | | SAP16-4.0-11 | 16 | 4.0 x 16.0 | 11 | 3 x 5 | 0.75 x 17 x 3 | 9 | 5.5 | 4 | 2.5 | 0 | 47 | Configure | | SAP15-4.0-11 | 15 | 4.0 x 15.0 | 11 | 3 x 5 | 0.75 x 17 x 3 | 9 | 6 | 4.5 | 3 | 0.5 | 45 | Configure | | SAP20-4.0-7 | 20 | 4.0 x 20.0 | 7 | 3 x 5 | 0.75 x 17 x 3 | 9 | 6 | 4.5 | 3 | 1 | 77 | Configure | | SAP25-5.0-7 | 25 | 5.0 x 25.0 | 7 | 3 x 5 | 1 x 36 x 4 | 11 | 7 | 5 | 3 | 1 | 118 | Configure | | SAP30-6.0-7 | 30 | 6.0 x 30.0 | 7 | 3 x 5 | 1 x 36 x 4 | 13.5 | 8 | 5 | 3 | 0 | 173 | Configure | | SAP14-4.0-11 | 14 | 4.0 x 14.0 | 11 | 3 x 5 | 0.75 x 17 x 3 | 9 | 6.5 | 5 | 3.5 | 1.5 | 43 | Configure | | SAP18-4.0-7 | 18 | 4.0 x 18.0 | 7 | 3 x 5 | 0.75 x 17 x 3 | 9 | 7.5 | 5.5 | 4 | 1 | 72 | Configure | | SAP12-4.0-11 | 12 | 4.0 x 12.0 | 11 | 3 x 5 | 0.75 x 17 x 3 | 9 | 8 | 6.5 | 4.5 | 2.5 | 38 | Configure | | SAP16-4.0-7 | 16 | 4.0 x 16.0 | 7 | 3 x 5 | 0.75 x 17 x 3 | 9 | 8.5 | 6.5 | 5 | 2 | 65 | Configure | | SAP20-5.0-7 | 20 | 5.0 x 20.0 | 7 | 3 x 5 | 1 x 36 x 4 | 11 | 10.5 | 8 | 5.5 | 1.5 | 97 | Configure | | SAP25-6.0-7 | 25 | 6.0 x 25.0 | 7 | 3 x 5 | 1 x 36 x 4 | 13.5 | 11.5 | 8 | 5.5 | 2 | 147 | Configure | | SAP30-6.0-3 | 30 | 6.0 x 30.0 | 3 | 3 x 5 | 1 x 36 x 4 | 13.5 | 12 | 8.5 | 5.5 | 2 | 219 | Configure | | SAP10-4.0-11 | 10 | 4.0 x 10.0 | 11 | 3 x 5 | 0.75 x 17 x 3 | 9 | 10.5 | 8 | 6 | 4.5 | 34 | Configure | | SAP18-5.0-7 | 18 | 5.0 x 18.0 | 7 | 3 x 5 | 1 x 36 x 4 | 11 | 12.5 | 9.5 | 7 | 2.5 | 89 | Configure | | SAP08-4.0-11 | 8 | 4.0 x 8.0 | 11 | 3 x 5 | 0.75 x 17 x 3 | 9 | 13.5 | 10.5 | 8 | 7 | 30 | Configure | | SAP25-6.0-3 | 25 | 6.0 x 25.0 | 3 | 3 x 5 | 1 x 36 x 4 | 13.5 | 16.5 | 12 | 8.5 | 2 | 185 | Configure | | SAP20-6.0-7 | 20 | 6.0 x 20.0 | 7 | 3 x 5 | 1 x 36 x 4 | 13.5 | 16 | 12 | 9 | 3.5 | 121 | Configure | | SAP20-6.0-3 | 20 | 6.0 x 20.0 | 3 | 3 x 5 | 1 x 36 x 4 | 13.5 | 22.5 | 17 | 13 | 6.5 | 151 | Configure |
|
FINISHES
|
MOUNTING DESIGNATIONS
Tenon Mount
| 2 | 2 3/8'' x 4'' TENON | | 3 | 2 7/8'' x 4'' TENON | | 3.5 | 3 1/2'' x 6'' TENON | | 4 | 4'' x 6'' TENON |
|
Drill Mount
| DM10 | Drilled for 1 Luminaire | | DM2090 | Drilled for 2 Luminaires @ 90º | | DM2180 | Drilled for 2 Luminaires @ 180º | | DM3090 | Drilled for 3 Luminaires @ 90º | | DM3120 | Drilled for 3 Luminaires @ 120º | | DM4090 | Drilled for 4 Luminaires @ 90º |
|
|
|
Accessories
| BC | Base Cover | | NC | Nut Covers | | CPL | Threaded Coupling* | | NPL | Threaded Nipple* | | LAB | Less Anchor Bolt | | LAB | Less Anchor Bolt | | VD | Vibration Damping Pad** |
|
Optional Handholes
| 58HH | 5'' x 8'' Handhole* | | 410HH | 4'' x 10'' Handhole* |
|
Extra Handholes
|
Embedment Pole Options
| E | Embedded Pole | | GS | Ground Sleeve |
| | |
| For Embedment Poles: | | Recommended Mounting Height | Recommended Embedment Depth | | Less than 20' | 4' | | 20' - 33' | 6' |
Greater embedment depths are available upon request. |
|
|
* Please advise size, location, and orientation. (Handholes are restricted by size of pole shaft diameter)
** VD is standard on all poles greater than and equal to 20 feet.
PACKAGING
Immediately after coating, the lighting standard including the baseplate shall be wrapped in heavy corrugation specially designed and sized to achieve maximum protection in transit.
|
|
KW Industries, Inc. coating process system and stringent quality control procedures provide our customer the finest quality lighting standards in the industry.
|
|
standard
coating system