Getting your brightest ideas off the ground®


        
      COMPANY profile

       standard

       coating system

      OUR commitment

      Terms and Conditions

      Warranty

      ONLINE CATALOG

      Contact Us


RAP
Round aluminum Pole
Pole Shaft
The pole shaft is a seamless 6063-T6 aluminum alloy extrusion having a uniform wall thickness of 0.250", 0.188", 0.156" or 0.125". The sides of the shaft may be drilled for mounting luminaire fixtures. All aluminum alloys shall comply with metallurgical and mechanical properties set forth in the Aluminum Association Standards.
Base Plate
The anchor base is cast from A356 alloy aluminum. The anchor base telescopes the pole shaft and is circumferentially welded top and bottom. All welds are performed in accordance with the American Welding Society specification AWS D1.2, latest edition.
Anchor Bolts
Anchor bolts are fabricated from commercial quality hot rolled carbon steel bar that meets or exceeds a minimum yield strength of 55,000 psi. Four properly sized anchor bolts, each with two regular hex nuts and washers, are furnished and shipped with all poles unless otherwise specified.
Handhole
An oval reinforced gasketed handhole, having a nominal 3" x 5" or 4" x 6-1/2" inside opening, located 1'-6" above base, is standard on all poles. Optional 5" x 8" and 4" x 10" handholes are available (see options). A grounding provision is located inside the handhole ring.
Finishes
The Standard Finish is a polyester thermosetting powder coating applied to the surface of the substrate to a minimum of 3 mils for all color finishes.

HOW TO ORDER
When ordering KW lighting standards, mounting adaptors and accessories, be sure to specify the complete catalog number. Our catalog numbers reflect the precise specifications of the item ordered to ensure our customers will receive the product which meets their exact requirements.
The following explanation of the catalog numbers will be helpful in placing orders:

CATALOG LOGIC - ORDERING SAMPLE

Catalog Number Nominal
Height
Pole Shaft Thickness Handhole
Size
Anchor Bolt Bolt
Circle
80
MPH
90
MPH
100
MPH
110
MPH
Ship
WT.
Select
RAP08-4.0-1184.0 x 8.0 112 x 40.75 x 17 x 3 8.75118.56.54.519Configure
RAP10-4.0-11104.0 x 10.0 112 x 40.75 x 17 x 3 8.758.56.54.5323Configure
RAP12-4.0-11124.0 x 12.0 112 x 40.75 x 17 x 3 8.756.553.5226Configure
RAP14-4.0-11144.0 x 14.0 112 x 40.75 x 17 x 3 8.7553.52.51.530Configure
RAP16-4.0-11164.0 x 16.0 112 x 40.75 x 17 x 3 8.7542.51.5133Configure
RAP16-6.0-9166.0 x 16.0 93 x 51 x 36 x 4 10.514.510.585.562Configure
RAP20-6.0-9206.0 x 20.0 93 x 51 x 36 x 4 10.510753.581Configure
RAP25-6.0-9256.0 x 25.0 93 x 51 x 36 x 4 10.56.542.51.5100Configure
RAP16-6.0-7166.0 x 16.0 73 x 51 x 36 x 4 10.517.513.510773Configure
RAP18-6.0-7186.0 x 18.0 73 x 51 x 36 x 4 10.5151185.581Configure
RAP20-6.0-7206.0 x 20.0 73 x 51 x 36 x 4 10.5139.56.54.589Configure
RAP25-6.0-7256.0 x 25.0 73 x 51 x 36 x 4 10.58.563.52.5109Configure
RAP30-6.0-7306.0 x 30.0 73 x 51 x 36 x 4 10.55.531.51129Configure
RAP12-5.0-9125.0 x 12.0 93 x 51 x 36 x 48.51410.585.529Configure
RAP14-5.0-9145.0 x 14.0 93 x 51 x 36 x 48.511.58.56.5434Configure
RAP16-5.0-9165.0 x 16.0 93 x 51 x 36 x 48.59.575338Configure
RAP18-5.0-9185.0 x 18.0 93 x 51 x 36 x 48.585.542.544Configure
RAP20-5.0-9205.0 x 20.0 93 x 51 x 36 x 48.56.54.531.549Configure

FINISHES


      Standard  
BRZ    Bronze    
BLK    Black    
GRY    Gray    
GRN    Green    
WHT    White    
P    Primed    
NA    Natural Aluminum    
  
 1 YEAR WARRANTY   

MOUNTING DESIGNATIONS


   Tenon Mount  
2    2 3/8 '' x 4 '' TENON    
3    2 7/8'' x 4'' TENON    
3.5    3 1/2'' x 6'' TENON    
4    4'' x 6'' TENON    
  

   Drill Mount  
DM10    Drilled for 1 Luminaire    
DM2090    Drilled for 2 Luminaires @ 90º    
DM2180    Drilled for 2 Luminaires @ 180º    
DM3090    Drilled for 3 Luminaires @ 90º    
DM3120    Drilled for 3 Luminaires @ 120º    
DM4090    Drilled for 4 Luminaires @ 90º    
  

   Accessories  
BC    Base Cover    
NC    Nut Covers    
CPL    Threaded Coupling*    
NPL    Threaded Nipple*    
LAB    Less Anchor Bolt    
OTC    Open Top with Cover    
VD    Vibration Damping Pad**    
  

   Optional Handholes  
58HH    5'' x 8'' Handhole*    
410HH    4'' x 10'' Handhole*    
  

   Extra Handholes  
XHH    Extra Handhole*    
  

   Embedment Pole Options  
E    Embedded Pole    
GS    Ground Sleeve    
  

For Embedment Poles:
Recommended Mounting HeightRecommended Embedment Depth
Less than 20'4'
20' - 33'6'

Greater embedment depths are available upon request.


* Please advise size, location, and orientation. (Handholes are restricted by size of pole shaft diameter)
** VD is standard on all poles greater than and equal to 20 feet.

PACKAGING
Immediately after coating, the lighting standard including the baseplate shall be wrapped in heavy corrugation specially designed and sized to achieve maximum protection in transit.
KW Industries, Inc. coating process system and stringent quality control procedures provide our customer the finest quality lighting standards in the industry.

Printer Friendly View