Printer Friendly Version



[Pole Shaft]



[Anchor Bolts]
Anchor bolts are fabricated from commercial quality hot rolled carbon steel bar that meets or exceeds a minimum yield strength of 55,000 psi. Four properly sized anchor bolts, each with two regular hex nuts and washers, are furnished and shipped with all poles unless otherwise specified. Anchor bolts shall have the threaded end galvanized a minimum of 8 inches in accordance with ASTM A-153. Fully galvanized anchor bolts are available upon request.


[Base Plate]


[Handhole]


[Finish]
All exterior metal surfaces are mechanically cleaned to remove all oxides and contaminants prior to coating. The standard finish is a polyester thermosetting powder coating applied to the surface of the substrate to a minimum of 3 mils for all color finishes. Galvanizing is available upon request.













FINISH


   P - Primer
BK - Black Finish Color
BZ - Bronze Finish Color
GN - Green Finish Color
GY - Gray Finish Color
LA - Dark Natural Aluminum
LM - Natural Aluminum
G - Hot Dipped Galvanized
WH - White Finish Color
CT - Custom Color
G/BK - Black over Galvanized
G/BZ - Bronze over Galvanized
G/GN - Green over Galvanized
G/GY - Gray over Galvanized
G/LM - Natural Aluminum over galvanized
G/WH - White over Galvanized
G/CT - Custom over Galvanized



MOUNTING DESIGNATIONS


   OT - Open Top
PC - Pole Cap
2 - 2 3/8” OD Tenon
3 - 2 7/8” OD Tenon
3.5 - 3 1/2” OD Tenon
4 - 4” OD x 6” Tenon
DM - Drilled Mount
DM10 - Drilled for 1 Luminaire
DM29 - Drilled for 2 Luminaires at 90º
DM28 - Drilled for 2 Luminaires at 180º
DM39 - Drilled for 3 Luminaires at 90º
DM49 - Drilled for 4 Luminaires at 90º
WP - Wood Pole


* Standard location for DM10 is 90º to the right of the handhole.


OPTIONS


   XHH - Extra Handhole
WPRP - Festoon Opening
CPL - Threaded Coupling
NPL - Threaded Nipple
VDI - Vibration Damper Internal
BC - Base Cover
NC - Nut Covers
LAB - Less Anchor Bolt
EMB - Embedded Pole




SORT THE LIST BELOW BASED ON YOUR PREFERENCE BY CLICKING THE COLUMN TITLE

Height
(ft.)
Catalog Number Pole Shaft
(in.) x (ft.)
Shaft
Gauge
Bolt Circle
(in.)
Anchor Bolt
(in.) x (in.) x (in.)
Handhole Size
(in.)
80 MPH
(ft.²)
90 MPH
(ft.²)
100 MPH
(ft.²)
Ship Wt.
(lbs)
Select
8SA40011084.0 x 8.0 1190.75 x 17 x 3 3 x 513.510.5830Configure
10SA40011104.0 x 10.0 1190.75 x 17 x 3 3 x 510.58634Configure
12SA40011124.0 x 12.0 1190.75 x 17 x 3 3 x 586.54.538Configure
14SA40011144.0 x 14.0 1190.75 x 17 x 3 3 x 56.553.543Configure
15SA40011154.0 x 15.0 1190.75 x 17 x 3 3 x 564.5345Configure
16SA40011164.0 x 16.0 1190.75 x 17 x 3 3 x 55.542.547Configure
18SA40011184.0 x 18.0 1190.75 x 17 x 3 3 x 543252Configure
16SA40007164.0 x 16.0 790.75 x 17 x 3 3 x 58.56.5565Configure
18SA40007184.0 x 18.0 790.75 x 17 x 3 3 x 57.55.5472Configure
20SA40007204.0 x 20.0 790.75 x 17 x 3 3 x 564.5377Configure
25SA60007256.0 x 25.0 713.51 x 36 x 4 3 x 511.585.5147Configure
30SA60007306.0 x 30.0 713.51 x 36 x 4 3 x 5853173Configure
20SA60003206.0 x 20.0 313.51 x 36 x 4 3 x 522.51713151Configure
25SA60003256.0 x 25.0 313.51 x 36 x 4 3 x 516.5128.5185Configure
30SA60003306.0 x 30.0 313.51 x 36 x 4 3 x 5128.55.5219Configure
18SA50007185.0 x 18.0 7111 x 36 x 43 x 512.59.5789Configure
20SA50007205.0 x 20.0 7111 x 36 x 43 x 510.585.597Configure
25SA50007255.0 x 25.0 7111 x 36 x 43 x 5753118Configure