Printer Friendly Version



[Pole Shaft]



[Anchor Bolts]
Anchor bolts are fabricated from commercial quality hot rolled carbon steel bar that meets or exceeds a minimum yield strength of 55,000 psi. Four properly sized anchor bolts, each with two regular hex nuts and washers, are furnished and shipped with all poles unless otherwise specified. Anchor bolts shall have the threaded end galvanized a minimum of 8 inches in accordance with ASTM A-153. Fully galvanized anchor bolts are available upon request.


[Base Plate]


[Handhole]


[Finish]
All exterior metal surfaces are mechanically cleaned to remove all oxides and contaminants prior to coating. The standard finish is a polyester thermosetting powder coating applied to the surface of the substrate to a minimum of 3 mils for all color finishes. Galvanizing is available upon request.













FINISH


   P - Primer
BK - Black Finish Color
BZ - Bronze Finish Color
GN - Green Finish Color
GY - Gray Finish Color
LA - Dark Natural Aluminum
LM - Natural Aluminum
G - Hot Dipped Galvanized
WH - White Finish Color
CT - Custom Color
G/BK - Black over Galvanized
G/BZ - Bronze over Galvanized
G/GN - Green over Galvanized
G/GY - Gray over Galvanized
G/LM - Natural Aluminum over galvanized
G/WH - White over Galvanized
G/CT - Custom over Galvanized



MOUNTING DESIGNATIONS


   OT - Open Top
PC - Pole Cap
2 - 2 3/8” OD Tenon
3 - 2 7/8” OD Tenon
3.5 - 3 1/2” OD Tenon
4 - 4” OD x 6” Tenon
DM - Drilled Mount
DM10 - Drilled for 1 Luminaire
DM29 - Drilled for 2 Luminaires at 90º
DM28 - Drilled for 2 Luminaires at 180º
DM39 - Drilled for 3 Luminaires at 90º
DM49 - Drilled for 4 Luminaires at 90º
WP - Wood Pole


* Standard location for DM10 is 90º to the right of the handhole.


OPTIONS


   XHH - Extra Handhole
WPRP - Festoon Opening
CPL - Threaded Coupling
NPL - Threaded Nipple
VDI - Vibration Damper Internal
BC - Base Cover
NC - Nut Covers
LAB - Less Anchor Bolt
EMB - Embedded Pole




SORT THE LIST BELOW BASED ON YOUR PREFERENCE BY CLICKING THE COLUMN TITLE

Height
(ft.)
Catalog Number Pole Shaft
(in.) x (ft.)
Shaft
Gauge
Bolt Circle
(in.)
Anchor Bolt
(in.) x (in.) x (in.)
Handhole Size
(in.)
80 MPH
(ft.²)
90 MPH
(ft.²)
100 MPH
(ft.²)
Ship Wt.
(lbs)
Select
8RA40011084.0 x 8.0 118.750.75 x 17 x 3 2 x 4118.56.519Configure
10RA40011104.0 x 10.0 118.750.75 x 17 x 3 2 x 48.56.54.523Configure
12RA40011124.0 x 12.0 118.750.75 x 17 x 3 2 x 46.553.526Configure
12RA50009125.0 x 12.0 98.51 x 36 x 43 x 51410.5829Configure
14RA40011144.0 x 14.0 118.750.75 x 17 x 3 2 x 453.52.530Configure
14RA50009145.0 x 14.0 98.51 x 36 x 43 x 511.58.56.534Configure
16RA40011164.0 x 16.0 118.750.75 x 17 x 3 2 x 442.51.533Configure
16RA50009165.0 x 16.0 98.51 x 36 x 43 x 59.57538Configure
16RA60009166.0 x 16.0 910.51 x 36 x 4 3 x 514.510.5862Configure
18RA50009185.0 x 18.0 98.51 x 36 x 43 x 585.5444Configure
18RA60007186.0 x 18.0 710.51 x 36 x 4 3 x 51511881Configure
20RA50009205.0 x 20.0 98.51 x 36 x 43 x 56.54.5349Configure
20RA60009206.0 x 20.0 910.51 x 36 x 4 3 x 5107581Configure
20RA60007206.0 x 20.0 710.51 x 36 x 4 3 x 5139.56.589Configure
25RA60009256.0 x 25.0 910.51 x 36 x 4 3 x 56.542.5100Configure
25RA60007256.0 x 25.0 710.51 x 36 x 4 3 x 58.563.5109Configure
30RA60007306.0 x 30.0 710.51 x 36 x 4 3 x 55.531.5129Configure