The luminaire adaptor arms are fabricated from 2" schedule 40 pipe and the retaining strap clamps are fabricated from 3/16" x 3" flatbar.
The pipe and flatbar are made from commercial grade hot rolled carbon steel.
[Mounting Options & Configurations]
Wood pole luminaire adapters are designed to fit 8" thru 12" diameter poles. Assembly hardware is furnished with each adaptor.
Adaptors shall be manufactured with one, two, three or four light configurations. The adaptor with two luminaire mounts is available in a 180° straight line. Adaptors with three luminaire mounts are available in a 90° and 120° configuration. The adaptor with four luminaire mounts is available in a 90° configuration.
For catalog number logic, see chart below.
For configurations, see depicted illustrations.
Special adaptors with various arm length are readily available.
All exterior metal surfaces are mechanically cleaned to remove all oxides and contaminants prior to coating. The standard finish is a polyester thermosetting powder coating applied to the surface of the substrate to a minimum of 3 mils for all color finishes.
Galvanizing is available upon request.