[Material]
The luminaire adaptor arm shall be fabricated from 3 1/2" x 3 1/2" x
3/8" commercial grade angle and 4" channel for attachment to
wood pole. The 3, 4 and 5 luminaire adaptors are furnished with
angle brace supports. Mounting hardware for attaching the
adaptor to the pole will not be supplied.
|
[Mounting Options & Configurations]
The adaptor arm shall be furnished to accommodate a luminaire
mounted onto a 2" schedule 40 pipe tenon or a drill mount pattern
with limited perpendicular hole spread. Adaptors are available
with luminaire mounting spreads of 30" and 36"
|
[Finish]
All exterior metal surfaces are mechanically cleaned to remove all oxides and contaminants prior to coating. The standard finish is a polyester thermosetting powder coating applied to the surface of the substrate to a minimum of 3 mils for all color finishes.
Galvanizing is available upon request.
|
