| AB, PB, WB, WBR - Wall Mount Luminaire Adaptors
|
[Material]
All luminaire adaptor material shall be manufactured from commercial grade hot rolled carbon steel.
The luminaire mounts on adaptors depicted with tenons will be fabricated from 2" schedule 40 pipe (2 3/8" O.D.) Adaptor types PB-1,
WB-1 and WB-2 will be fabricated from 3" square 11 gauge material.
Types AB-0 and AB-1 will be fabricated from 1/4" x 3" flat bar. Type WBR-1 will be fabricated from 2" schedule 40 pipe (2 3/8" O.D.).
|
[Mounting Options & Configurations]
Illustrated luminaire adaptors have the following options:
Type WB-1, WB-2 and WBR-1 are wall mount only.
Type PB-1, AB-0 and AB-1 can be either wall mount or square pole mount.
For catalog number logic, see chart below.
For configurations and spacings, see depicted illustrations.
Special adaptors with various tenon spacing, tenon O.D. and configurations are readily available.
|
[Finish]
All exterior metal surfaces are mechanically cleaned to remove all oxides and contaminants prior to coating. The standard finish is a polyester thermosetting powder coating applied to the surface of the substrate to a minimum of 3 mils for all color finishes.
Galvanizing is available upon request.
|
|
|
|
