[Material]
The luminaire adaptor arms are fabricated from 2" schedule 40 pipe. The pipe is made from commercial grade hot rolled carbon steel.
Pole top spoke luminaire adaptors shall be furnished with a removable top cap.
|
[Mounting Options & Configurations]
The pole tenon adaptor boot shall be available to fit either 2" or 3" schedule 40 pipe pole top tenons. Arms are available in 48 or 72 inch length with a 24 inch vertical rise from the bottom of the bracket boot.
Adaptors shall be manufactured with one, two, three or four light configurations. The adaptor with two luminaire mounts is available in a 180° straight line. The adaptor with three luminaire mounts is available in a 120° configuration. The adaptor with four luminaire mounts is available in a 90° configuration.
For catalog number logic, see chart below.
For configurations, see depicted illustrations.
Special adaptors with various arm length are readily available.
|
[Finish]
All exterior metal surfaces are mechanically cleaned to remove all oxides and contaminants prior to coating. The standard finish is a polyester thermosetting powder coating applied to the surface of the substrate to a minimum of 3 mils for all color finishes.
Galvanizing is available upon request.
|
