Printer Friendly Version

RT - ROUND TAPERED STEEL


[Pole Shaft]
The pole shaft is one or two section design, each section being fabricated from standard 11 gauge (0.1196"), 7 gauge (0.1793"), or 3 gauge (0.2391") steel. The pole shaft material is a weldable grade hot rolled commercial quality carbon steel with a guaranteed minimum yield strength of 55,000 psi after fabrication. Each section is one-piece construction with a full length longitudinal weld and is cylindrical in cross-section having a uniform taper of 0.14 inches of diameter change per foot of length.


[Anchor Bolts]
Anchor bolts are fabricated from commercial quality hot rolled carbon steel bar that meets or exceeds a minimum yield strength of 55,000 psi. Four properly sized anchor bolts, each with two regular hex nuts and washers, are furnished and shipped with all poles unless otherwise specified. Anchor bolts shall have the threaded end galvanized a minimum of 8 inches in accordance with ASTM A-153. Fully galvanized anchor bolts are available upon request.


[Base Plate]
The anchor base is fabricated from structural quality hot rolled carbon steel plate that meets or exceeds a minimum yield strength of 36,000 psi. The anchor base telescopes the pole shaft and is circumferentially welded top and bottom. All welds are performed in accordance with the American Welding Society specification AWS D1.1, latest edition.


[Handhole]
An oval reinforced gasketed handhole, having a nominal 3" x 5" or 4" x 6-1/2" inside opening, located 1'-6" above base, is standard on all poles. Optional 5" x 8" and 4" x 10" handholes are available (see options). A grounding provision is located inside the handhole ring.


[Finish]
All exterior metal surfaces are mechanically cleaned to remove all oxides and contaminants prior to coating. The standard finish is a polyester thermosetting powder coating applied to the surface of the substrate to a minimum of 3 mils for all color finishes. Galvanizing is available upon request.


FINISH


   P - Primer
BK - Black Finish Color
BZ - Bronze Finish Color
GN - Green Finish Color
GY - Gray Finish Color
LA - Dark Natural Aluminum
LM - Natural Aluminum
G - Hot Dipped Galvanized
WH - White Finish Color
CT - Custom Color
G/BK - Black over Galvanized
G/BZ - Bronze over Galvanized
G/GN - Green over Galvanized
G/GY - Gray over Galvanized
G/LM - Natural Aluminum over galvanized
G/WH - White over Galvanized
G/CT - Custom over Galvanized



MOUNTING DESIGNATIONS


   OT - Open Top
PC - Pole Cap
2 - 2 3/8” OD Tenon
3 - 2 7/8” OD Tenon
3.5 - 3 1/2” OD Tenon
4 - 4” OD x 6” Tenon
DM - Drilled Mount
DM10 - Drilled for 1 Luminaire
DM29 - Drilled for 2 Luminaires at 90º
DM28 - Drilled for 2 Luminaires at 180º
DM39 - Drilled for 3 Luminaires at 90º
DM49 - Drilled for 4 Luminaires at 90º
WP - Wood Pole


* Standard location for DM10 is 90º to the right of the handhole.


OPTIONS


   XHH - Extra Handhole
WPRP - Festoon Opening
CPL - Threaded Coupling
NPL - Threaded Nipple
VDI - Vibration Damper Internal
BC - Base Cover
NC - Nut Covers
LAB - Less Anchor Bolt
EMB - Embedded Pole
SORT THE LIST BELOW BASED ON YOUR PREFERENCE BY CLICKING THE COLUMN TITLE

Height
(ft.) 		Catalog Number Pole Shaft
(in.) x (in.) x (ft.) 		Shaft
Gauge 		Bolt Circle
(in.) 		Anchor Bolt
(in.) x (in.) x (in.) 		Handhole Size
(in.) 		80 MPH
(ft.²) 		90 MPH
(ft.²) 		100 MPH
(ft.²) 		Ship Wt.
(lbs) 		Select
10RT45011104.5 x 3.0 x 10.01180.75 x 17 x 33 x 5.045373072Configure
12RT48011124.8 x 3.0 x 12.01180.75 x 17 x 33 x 5.042342884Configure
14RT51011145.0 x 3.0 x 14.01180.75 x 17 x 33 x 5.040322796Configure
15RT54011155.4 x 3.3 x 15.01180.75 x 17 x 33 x 5.0332722104Configure
16RT54011165.4 x 3.0 x 16.01180.75 x 17 x 33 x 5.0322621109Configure
18RT56011185.6 x 3.0 x 18.01180.75 x 17 x 33 x 5.0282318122Configure
20RT59011206.0 x 3.3 x 20.0119.50.75 x 30 x 33 x 5.0221814149Configure
20RT61011206.0 x 3.3 x 20.0119.50.75 x 30 x 33 x 5.0221814173Configure
20RT65011206.5 x 3.7 x 20.0119.51.00 x 36 x 44 x 6.5423427188Configure
25RT61011256.0 x 2.6 x 25.0119.50.75 x 30 x 33 x 5.0161310173Configure
25RT66011256.8 x 3.3 x 25.011100.75 x 30 x 34 x 6.5181411190Configure
25RT68011256.8 x 3.3 x 25.011100.75 x 30 x 34 x 6.5272115213Configure
25RT70011256.8 x 3.3 x 25.011101.00 x 36 x 44 x 6.5352420230Configure
25RT75011257.5 x 4.0 x 25.01110.51.00 x 36 x 44 x 6.5423226253Configure
30RT100113010.0 x 5.8 x 30.01113.51.00 x 36 x 44 x 6.5413124388Configure
30RT110073011.0 x 6.8 x 30.07151.25 x 42 x 64 x 6.5624737720Configure
30RT68011306.8 x 2.6 x 30.011100.75 x 30 x 34 x 6.514108213Configure
30RT75011307.5 x 3.3 x 30.01110.51.00 x 36 x 44 x 6.5221713265Configure
30RT80011308.0 x 3.9 x 30.011111.00 x 36 x 44 x 6.5241915293Configure
30RT85011308.5 x 4.3 x 30.01111.51.00 x 36 x 44 x 6.5292218309Configure
30RT90011309.0 x 4.8 x 30.01112.51.00 x 36 x 44 x 6.5322520331Configure
30RT90007309.0 x 4.8 x 30.0712.51.25 x 42 x 64 x 6.5544335493Configure
35RT100113510.0 x 4.5 x 35.01113.51.00 x 36 x 44 x 6.5312317480Configure
35RT110073511.0 x 6.0 x 35.07151.25 x 42 x 64 x 6.5624737720Configure
35RT75011357.5 x 2.6 x 35.01110.51.00 x 36 x 44 x 6.515129283Configure
35RT80011358.0 x 3.2 x 35.011111.00 x 36 x 44 x 6.5171310311Configure
35RT85011358.5 x 3.6 x 35.01111.51.00 x 36 x 44 x 6.5211613338Configure
35RT90011359.0 x 4.0 x 35.01112.51.00 x 36 x 44 x 6.5241914358Configure
35RT90007359.0 x 4.0 x 35.0712.51.25 x 42 x 64 x 6.5423327534Configure
39RT100113910.0 x 4.5 x 39.01113.51.00 x 36 x 44 x 6.5261817480Configure
39RT110073911.0 x 5.5 x 39.07151.25 x 42 x 64 x 6.5473628720Configure
39RT120073912.0 x 6.5 x 39.07161.50 x 54 x 64 x 6.5856752949Configure
39RT140073914.0 x 8.5 x 39.07201.50 x 54 x 64 x 6.51080631075Configure
39RT81011398.0 x 2.6 x 39.011111.00 x 36 x 44 x 6.513108327Configure
39RT90011399.0 x 3.5 x 39.01112.51.00 x 36 x 44 x 6.5191411376Configure
39RT90007399.0 x 3.5 x 39.0712.51.25 x 42 x 64 x 6.5372922597Configure
45RT100114510.0 x 4.6 x 39.0 /
5.02 x 3.9 x 7.75		11/1113.51.00 x 36 x 44 x 6.518139488Configure
45RT110074511.0 x 5.5 x 39.0 /
6.00 x 4.9 x 8.30		7/11151.25 x 42 x 64 x 6.5362822800Configure
45RT120074512.0 x 7.8 x 30.0 /
8.5 x 5.95 x 18.25		7/11161.5 x 54 x 64 x 6.56650391008Configure
45RT125034512.5 x 8.3 x 30.0 /
9.0 x 6.6 x 17.4		3/716.51.50 x 54 x 64 x 6.57054411342Configure
45RT140074514.0 x 8.3 x 41.0 /
9.0 x 8.0 x 7.0		7/11201.50 x 54 x 64 x 6.58060451272Configure
45RT140034514.0 x 8.3 x 41.0 /
9.0 x 8.0 x 7.0		3/7201.75 x 84 x 64 x 6.51187681729Configure
50RT100115010.0 x 4.6 x 39.0 /
5.02 x 3.2 x 12.75		11/1113.51.00 x 36 x 44 x 6.51285510Configure
50RT110075011.0 x 5.5 x 39.0 /
6.00 x 4.2 x 13.3		7/11151.25 x 42 x 64 x 6.5272015802Configure
50RT120075012.0 x 7.8 x 30.0 /
8.5 x 5.3 x 23.25		7/11161.50 x 54 x 64 x 6.5423333937Configure
50RT125035012.5 x 8.3 x 30.0 /
9.0 x 5.9 x 22.4		3/716.51.50 x 54 x 64 x 6.52719121331Configure
50RT140075014.0 x 8.3 x 41.0 /
9.0 x 7.3 x 12.0		7/11201.50 x 54 x 64 x 6.56447341323Configure
50RT140035014.0 x 8.3 x 41.0 /
9.0 x 7.3 x 12.0		3/7201.75 x 54 x 64 x 6.59372551807Configure
55RT120075512.0 x 7.8 x 30.0 /
8.5 x 4.6 x 28.25		7/11161.50 x 54 x 64 x 6.5211913970Configure
55RT125035512.5 x 8.3 x 30.0 /
9.00 x 5.2 x 27.4		3/716.51.50 x 54 x 64 x 6.52719121331Configure
55RT140035514.0 x 8.3 x 41.0 /
9.00 x 6.7 x 16.7		3/7201.75 x 84 x 64 x 6.55037271646Configure
55RT140075514.0 x 8.5 x 39.0 /
9.00 x 6.5 x 17.8		7/11201.50 x 54 x 64 x 6.53323151254Configure
60RT120076012.0 x 7.8 x 30.0 /
8.5 x 3.8 x 33.25		7/11161.50 x 54 x 64 x 6.5151171011Configure
60RT125036012.5 x 8.3 x 30.0 /
9.00 x 4.5 x 32.4		3/716.51.50 x 54 x 64 x 6.5211481375Configure
60RT140036014.0 x 8.3 x 41.0 /
9.00 x 6.0 x 21.7		3/7201.75 x 84 x 64 x 6.54130211705Configure
60RT140076014.0 x 8.5 x 39.0 /
9.00 x 5.8 x 22.6		7/11201.50 x 54 x 64 x 6.52617111299Configure
65RT125036512.5 x 8.3 x 30.0 /
9.00 x 3.8 x 37.4		3/716.51.50 x 54 x 64 x 6.5171051413Configure
65RT140036514.0 x 8.3 x 41.0 /
9.00 x 5.3 x 26.7		3/7201.75 x 84 x 64 x 6.53424161757Configure
65RT140076514.0 x 8.5 x 39.0 /
9.00 x 5.0 x 27.6		7/11201.50 x 54 x 64 x 6.5211371333Configure
70RT140037014.0 x 8.3 x 41.0 /
9.00 x 4.6 x 31.7		3/7201.75 x 84 x 64 x 6.52618111803Configure
70RT140077014.0 x 8.5 x 39.0 /
9.00 x 4.4 x 32.6		7/11201.50 x 54 x 64 x 6.515831363Configure