WJM Poles

RT - ROUND TAPERED STEEL

[Pole Shaft]
The pole shaft is one or two section design, each section being fabricated from standard 11 gauge (0.1196"), 7 gauge (0.1793"), or 3 gauge (0.2391") steel. The pole shaft material is a weldable grade hot rolled commercial quality carbon steel with a guaranteed minimum yield strength of 55,000 psi after fabrication. Each section is one-piece construction with a full length longitudinal weld and is cylindrical in cross-section having a uniform taper of 0.14 inches of diameter change per foot of length.

[Anchor Bolts]
Anchor bolts are fabricated from commercial quality hot rolled carbon steel bar that meets or exceeds a minimum yield strength of 55,000 psi. Four properly sized anchor bolts, each with two regular hex nuts and washers, are furnished and shipped with all poles unless otherwise specified. Anchor bolts shall have the threaded end galvanized a minimum of 8 inches in accordance with ASTM A-153. Fully galvanized anchor bolts are available upon request.

[Base Plate]
The anchor base is fabricated from structural quality hot rolled carbon steel plate that meets or exceeds a minimum yield strength of 36,000 psi. The anchor base telescopes the pole shaft and is circumferentially welded top and bottom. All welds are performed in accordance with the American Welding Society specification AWS D1.1, latest edition.

[Handhole]
An oval reinforced gasketed handhole, having a nominal 3" x 5" or 4" x 6-1/2" inside opening, located 1'-6" above base, is standard on all poles. Optional 5" x 8" and 4" x 10" handholes are available (see options). A grounding provision is located inside the handhole ring.

[Finish]
All exterior metal surfaces are mechanically cleaned to remove all oxides and contaminants prior to coating. The standard finish is a polyester thermosetting powder coating applied to the surface of the substrate to a minimum of 3 mils for all color finishes. Galvanizing is available upon request.

FINISH

	P - Primer
	BK - Black Finish Color
	BZ - Bronze Finish Color
	GN - Green Finish Color
	GY - Gray Finish Color
	LA - Dark Natural Aluminum
	LM - Natural Aluminum
	G - Hot Dipped Galvanized
	WH - White Finish Color
	CT - Custom Color
	G/BK - Black over Galvanized
	G/BZ - Bronze over Galvanized
	G/GN - Green over Galvanized
	G/GY - Gray over Galvanized
	G/LM - Natural Aluminum over galvanized
	G/WH - White over Galvanized
	G/CT - Custom over Galvanized

MOUNTING DESIGNATIONS

	OT - Open Top
	PC - Pole Cap
	2 - 2 3/8� OD Tenon
	3 - 2 7/8� OD Tenon
	3.5 - 3 1/2� OD Tenon
	4 - 4� OD x 6� Tenon
	DM - Drilled Mount
	DM10 - Drilled for 1 Luminaire
	DM29 - Drilled for 2 Luminaires at 90º
	DM28 - Drilled for 2 Luminaires at 180º
	DM39 - Drilled for 3 Luminaires at 90º
	DM49 - Drilled for 4 Luminaires at 90º
	WP - Wood Pole

* Standard location for DM10 is 90� to the right of the handhole.

OPTIONS

	XHH - Extra Handhole
	WPRP - Festoon Opening
	CPL - Threaded Coupling
	NPL - Threaded Nipple
	VDI - Vibration Damper Internal
	BC - Base Cover
	NC - Nut Covers
	LAB - Less Anchor Bolt
	EMB - Embedded Pole

SORT THE LIST BELOW BASED ON YOUR PREFERENCE BY CLICKING THE COLUMN TITLE

Height (ft.)	Catalog Number	Pole Shaft (in.) x (in.) x (ft.)	Shaft Gauge	Bolt Circle (in.)	Anchor Bolt (in.) x (in.) x (in.)	Handhole Size (in.)	80 MPH (ft.²)	90 MPH (ft.²)	100 MPH (ft.²)	Ship Wt. (lbs)
10	RT4501110	4.5 x 3.0 x 10.0	11	8	0.75 x 17 x 3	3 x 5.0	45	37	30	72
12	RT4801112	4.8 x 3.0 x 12.0	11	8	0.75 x 17 x 3	3 x 5.0	42	34	28	84
14	RT5101114	5.0 x 3.0 x 14.0	11	8	0.75 x 17 x 3	3 x 5.0	40	32	27	96
15	RT5401115	5.4 x 3.3 x 15.0	11	8	0.75 x 17 x 3	3 x 5.0	33	27	22	104
16	RT5401116	5.4 x 3.0 x 16.0	11	8	0.75 x 17 x 3	3 x 5.0	32	26	21	109
18	RT5601118	5.6 x 3.0 x 18.0	11	8	0.75 x 17 x 3	3 x 5.0	28	23	18	122
20	RT5901120	6.0 x 3.3 x 20.0	11	9.5	0.75 x 30 x 3	3 x 5.0	22	18	14	149
20	RT6101120	6.0 x 3.3 x 20.0	11	9.5	0.75 x 30 x 3	3 x 5.0	22	18	14	173
20	RT6501120	6.5 x 3.7 x 20.0	11	9.5	1.00 x 36 x 4	4 x 6.5	42	34	27	188
25	RT6101125	6.0 x 2.6 x 25.0	11	9.5	0.75 x 30 x 3	3 x 5.0	16	13	10	173
25	RT6601125	6.8 x 3.3 x 25.0	11	10	0.75 x 30 x 3	4 x 6.5	18	14	11	190
25	RT6801125	6.8 x 3.3 x 25.0	11	10	0.75 x 30 x 3	4 x 6.5	27	21	15	213
25	RT7001125	6.8 x 3.3 x 25.0	11	10	1.00 x 36 x 4	4 x 6.5	35	24	20	230
25	RT7501125	7.5 x 4.0 x 25.0	11	10.5	1.00 x 36 x 4	4 x 6.5	42	32	26	253
30	RT1001130	10.0 x 5.8 x 30.0	11	13.5	1.00 x 36 x 4	4 x 6.5	41	31	24	388
30	RT1100730	11.0 x 6.8 x 30.0	7	15	1.25 x 42 x 6	4 x 6.5	62	47	37	720
30	RT6801130	6.8 x 2.6 x 30.0	11	10	0.75 x 30 x 3	4 x 6.5	14	10	8	213
30	RT7501130	7.5 x 3.3 x 30.0	11	10.5	1.00 x 36 x 4	4 x 6.5	22	17	13	265
30	RT8001130	8.0 x 3.9 x 30.0	11	11	1.00 x 36 x 4	4 x 6.5	24	19	15	293
30	RT8501130	8.5 x 4.3 x 30.0	11	11.5	1.00 x 36 x 4	4 x 6.5	29	22	18	309
30	RT9001130	9.0 x 4.8 x 30.0	11	12.5	1.00 x 36 x 4	4 x 6.5	32	25	20	331
30	RT9000730	9.0 x 4.8 x 30.0	7	12.5	1.25 x 42 x 6	4 x 6.5	54	43	35	493
35	RT1001135	10.0 x 4.5 x 35.0	11	13.5	1.00 x 36 x 4	4 x 6.5	31	23	17	480
35	RT1100735	11.0 x 6.0 x 35.0	7	15	1.25 x 42 x 6	4 x 6.5	62	47	37	720
35	RT7501135	7.5 x 2.6 x 35.0	11	10.5	1.00 x 36 x 4	4 x 6.5	15	12	9	283
35	RT8001135	8.0 x 3.2 x 35.0	11	11	1.00 x 36 x 4	4 x 6.5	17	13	10	311
35	RT8501135	8.5 x 3.6 x 35.0	11	11.5	1.00 x 36 x 4	4 x 6.5	21	16	13	338
35	RT9001135	9.0 x 4.0 x 35.0	11	12.5	1.00 x 36 x 4	4 x 6.5	24	19	14	358
35	RT9000735	9.0 x 4.0 x 35.0	7	12.5	1.25 x 42 x 6	4 x 6.5	42	33	27	534
39	RT1001139	10.0 x 4.5 x 39.0	11	13.5	1.00 x 36 x 4	4 x 6.5	26	18	17	480
39	RT1100739	11.0 x 5.5 x 39.0	7	15	1.25 x 42 x 6	4 x 6.5	47	36	28	720
39	RT1200739	12.0 x 6.5 x 39.0	7	16	1.50 x 54 x 6	4 x 6.5	85	67	52	949
39	RT1400739	14.0 x 8.5 x 39.0	7	20	1.50 x 54 x 6	4 x 6.5	10	80	63	1075
39	RT8101139	8.0 x 2.6 x 39.0	11	11	1.00 x 36 x 4	4 x 6.5	13	10	8	327
39	RT9001139	9.0 x 3.5 x 39.0	11	12.5	1.00 x 36 x 4	4 x 6.5	19	14	11	376
39	RT9000739	9.0 x 3.5 x 39.0	7	12.5	1.25 x 42 x 6	4 x 6.5	37	29	22	597
45	RT1001145	10.0 x 4.6 x 39.0 / 5.02 x 3.9 x 7.75	11/11	13.5	1.00 x 36 x 4	4 x 6.5	18	13	9	488
45	RT1100745	11.0 x 5.5 x 39.0 / 6.00 x 4.9 x 8.30	7/11	15	1.25 x 42 x 6	4 x 6.5	36	28	22	800
45	RT1200745	12.0 x 7.8 x 30.0 / 8.5 x 5.95 x 18.25	7/11	16	1.5 x 54 x 6	4 x 6.5	66	50	39	1008
45	RT1250345	12.5 x 8.3 x 30.0 / 9.0 x 6.6 x 17.4	3/7	16.5	1.50 x 54 x 6	4 x 6.5	70	54	41	1342
45	RT1400745	14.0 x 8.3 x 41.0 / 9.0 x 8.0 x 7.0	7/11	20	1.50 x 54 x 6	4 x 6.5	80	60	45	1272
45	RT1400345	14.0 x 8.3 x 41.0 / 9.0 x 8.0 x 7.0	3/7	20	1.75 x 84 x 6	4 x 6.5	11	87	68	1729
50	RT1001150	10.0 x 4.6 x 39.0 / 5.02 x 3.2 x 12.75	11/11	13.5	1.00 x 36 x 4	4 x 6.5	12	8	5	510
50	RT1100750	11.0 x 5.5 x 39.0 / 6.00 x 4.2 x 13.3	7/11	15	1.25 x 42 x 6	4 x 6.5	27	20	15	802
50	RT1200750	12.0 x 7.8 x 30.0 / 8.5 x 5.3 x 23.25	7/11	16	1.50 x 54 x 6	4 x 6.5	42	33	33	937
50	RT1250350	12.5 x 8.3 x 30.0 / 9.0 x 5.9 x 22.4	3/7	16.5	1.50 x 54 x 6	4 x 6.5	27	19	12	1331
50	RT1400750	14.0 x 8.3 x 41.0 / 9.0 x 7.3 x 12.0	7/11	20	1.50 x 54 x 6	4 x 6.5	64	47	34	1323
50	RT1400350	14.0 x 8.3 x 41.0 / 9.0 x 7.3 x 12.0	3/7	20	1.75 x 54 x 6	4 x 6.5	93	72	55	1807
55	RT1200755	12.0 x 7.8 x 30.0 / 8.5 x 4.6 x 28.25	7/11	16	1.50 x 54 x 6	4 x 6.5	21	19	13	970
55	RT1250355	12.5 x 8.3 x 30.0 / 9.00 x 5.2 x 27.4	3/7	16.5	1.50 x 54 x 6	4 x 6.5	27	19	12	1331
55	RT1400355	14.0 x 8.3 x 41.0 / 9.00 x 6.7 x 16.7	3/7	20	1.75 x 84 x 6	4 x 6.5	50	37	27	1646
55	RT1400755	14.0 x 8.5 x 39.0 / 9.00 x 6.5 x 17.8	7/11	20	1.50 x 54 x 6	4 x 6.5	33	23	15	1254
60	RT1200760	12.0 x 7.8 x 30.0 / 8.5 x 3.8 x 33.25	7/11	16	1.50 x 54 x 6	4 x 6.5	15	11	7	1011
60	RT1250360	12.5 x 8.3 x 30.0 / 9.00 x 4.5 x 32.4	3/7	16.5	1.50 x 54 x 6	4 x 6.5	21	14	8	1375
60	RT1400360	14.0 x 8.3 x 41.0 / 9.00 x 6.0 x 21.7	3/7	20	1.75 x 84 x 6	4 x 6.5	41	30	21	1705
60	RT1400760	14.0 x 8.5 x 39.0 / 9.00 x 5.8 x 22.6	7/11	20	1.50 x 54 x 6	4 x 6.5	26	17	11	1299
65	RT1250365	12.5 x 8.3 x 30.0 / 9.00 x 3.8 x 37.4	3/7	16.5	1.50 x 54 x 6	4 x 6.5	17	10	5	1413
65	RT1400365	14.0 x 8.3 x 41.0 / 9.00 x 5.3 x 26.7	3/7	20	1.75 x 84 x 6	4 x 6.5	34	24	16	1757
65	RT1400765	14.0 x 8.5 x 39.0 / 9.00 x 5.0 x 27.6	7/11	20	1.50 x 54 x 6	4 x 6.5	21	13	7	1333
70	RT1400370	14.0 x 8.3 x 41.0 / 9.00 x 4.6 x 31.7	3/7	20	1.75 x 84 x 6	4 x 6.5	26	18	11	1803
70	RT1400770	14.0 x 8.5 x 39.0 / 9.00 x 4.4 x 32.6	7/11	20	1.50 x 54 x 6	4 x 6.5	15	8	3	1363