[Pole Shaft]
|
[Anchor Bolts]
Anchor bolts are fabricated from commercial quality hot rolled carbon steel bar that meets or exceeds a minimum yield strength of 55,000 psi. Four properly sized anchor bolts, each with two regular hex nuts and washers, are furnished and shipped with all poles unless otherwise specified.
|
[Finish]
All exterior metal surfaces are mechanically cleaned to remove all oxides and contaminants prior to coating. The standard finish is a polyester thermosetting powder coating applied to the surface of the substrate to a minimum of 3 mils for all color finishes.
|


|
FINISH
| P - Primer | | BK - Black Finish Color | | BZ - Bronze Finish Color | | GN - Green Finish Color | | GY - Gray Finish Color | | LA - Dark Natural Aluminum | | LM - Natural Aluminum | | WT - White Finish Color | | CT - Custom Finish |
MOUNTING DESIGNATIONS
| 3 - 3" x 2 1/2" TENON | | 4 - 4" x 6" TENON | | SM2090 - For 2 Luminaire @ 90º * | | SM10 - For 1 Luminaire | | SM2180 - For 2 Luminaire @ 180º * | | SM3090 - For 3 Luminaire @ 90º * | | SM3120 - For 3 Luminaire @ 120º * | | SM4090 - For 4 Luminaire @ 90º * |
* Standard location for DM10 is 90º to the right of the handhole.
OPTIONS
| OT - Open Top | | PC - Pole Cap | | XHH - Extra Handhole | | WPRP - Festoon Opening | | CPL - Threaded Coupling | | NPL - Threaded Nipple | | VDP - Vibration Damper Pads | | LAB - Less Anchor Bolt |
BASE STYLES
| GA15 - Georgetown 15" Round | | PA10 - Philadelphia 10" x 10" octagonal | | WA17 - Washington 17" Round | | MA17 - Manhattan 17" Round | | WA13 - Washington 13" Round |
|