Printer Friendly Version

RTA - ROUND TAPERED ALUMINUM


[Pole Shaft]
The pole shaft is a seamless 6063-T6 aluminum alloy extrusion having a uniform wall thickness of 0.250", 0.188", 0.156" or 0.125". The sides of the shaft may be drilled for mounting luminaire fixtures. All aluminum alloys shall comply with metallurgical and mechanical properties set forth in the Aluminum Association Standards.


[Anchor Bolts]
Anchor bolts are fabricated from commercial quality hot rolled carbon steel bar that meets or exceeds a minimum yield strength of 55,000 psi. Four properly sized anchor bolts, each with two regular hex nuts and washers, are furnished and shipped with all poles unless otherwise specified.


[Base Plate]
The anchor base is cast from A356 alloy aluminum. The anchor base telescopes the pole shaft and is circumferentially welded top and bottom. All welds are performed in accordance with the American Welding Society specification AWS D1.2, latest edition.


[Handhole]
An oval reinforced gasketed handhole, having a nominal 2" x 4" or 3" x 5" inside opening, located 1"-6" above base, is standard on all poles. A grounding provision is located inside the handhole ring.


[Finish]
All exterior metal surfaces are mechanically cleaned to remove all oxides and contaminants prior to coating. The standard finish is a polyester thermosetting powder coating applied to the surface of the substrate to a minimum of 3 mils for all color finishes.













FINISH


P - Primer
BK - Black Finish Color
BZ - Bronze Finish Color
GN - Green Finish Color
GY - Gray Finish Color
LA - Dark Natural Aluminum
BA - Brush Aluminum
LM - Natural Aluminum
WH - White Finish Color
CT - Custom Color



MOUNTING DESIGNATIONS


OT - Open Top
PC - Pole Cap
2 - 2 3/8” OD Tenon
3 - 2 7/8” OD Tenon
3.5 - 3 1/2” OD Tenon
4 - 4” OD x 6” Tenon
DM10 - Drilled for 1 Luminaire
DM - Drilled Mount
DM29 - Drilled for 2 Luminaires at 90º
DM28 - Drilled for 2 Luminaires at 180º
DM39 - Drilled for 3 Luminaires at 90º
DM49 - Drilled for 4 Luminaires at 90º
WP - Wood Pole


* Standard location for DM10 is 90? to the right of the handhole.


OPTIONS


XHH - Extra Handhole
WPRP - Festoon Opening
CPL - Threaded Coupling
NPL - Threaded Nipple
VDP - Vibration Damper Pads
BC - Base Cover
NC - Nut Covers
LAB - Less Anchor Bolt
EMB - Embedded Pole

A Vibration Damping Pad Assembly will be provided for
aluminum poles 20 feet or taller.



SORT THE LIST BELOW BASED ON YOUR PREFERENCE BY CLICKING THE COLUMN TITLE

Height
(ft.)
Catalog Number Pole Shaft
(in.) x (ft.)
Shaft Thickness
(in.)
Bolt Circle
(in.)
Anchor Bolt
(in.) x (in.) x (in.)
Handhole Size
(in.)
80 MPH
(ft.²)
90 MPH
(ft.²)
100 MPH
(ft.²)
110 MPH
(ft.²)
Ship Wt.
(lbs)
Select
10RTA40011104.00 x 3.0 x 10.00.12570.75 x 17 x 33 x 56.54.53.52.524Configure
12RTA40011124.00 x 3.0 x 12.00.12570.75 x 17 x 3 3 x 55.03.52.5228Configure
15RTA50011155.00 x 3.0 x 15.000.1258.51 x 36 x 4 3 x 54.53.52.5242Configure
15RTA50007155.00 x 3.0 x 15.000.1888.51 x 36 x 4 3 x 58.06.04.53.557Configure
18RTA50007185.00 x 3.0 x 18.00 0.1888.51 x 36 x 4 3 x 56.04.03.02.567Configure
18RTA60007186.00 x 4.00 x 18.00 0.1889.51 x 36 x 4 3 x 59.07.05.54.579Configure
20RTA60007206.00 x 4.00 x 20.0 0.1889.51 x 36 x 4 3 x 57.55.54.53.587Configure
20RTA70007207.00 x 4.00 x 20.0 0.18810.51 x 36 x 4 3 x 511.59.07.05.5105Configure
25RTA70007257.00 x 4.00 x 25.00 0.18810.51 x 36 x 4 3 x 58.06.04.53.5128Configure
25RTA80007258.00 x 5.00 x 25.00 0.18811.51 x 36 x 4 3 x 511.59.07.05.5145Configure
25RTA80003258.00 x 5.00 x 25.00 0.25011.51 x 36 x 4 3 x 516.512.510.08187Configure
30RTA100073010.0 x 6.00 x 30.0 0.188141 x 36 x 4 3 x 514.511.08.57213Configure
30RTA80007308.00 x 5.00 x 30.0 0.18811.51 x 36 x 4 3 x 57.56.04.53.5172Configure
30RTA80003308.00 x 5.00 x 30.0 0.25011.51 x 36 x 4 3 x 511.08.56.55.5222Configure
35RTA100073510.0 x 6.00 x 35.00 0.188141 x 36 x 4 3 x 511.58.56.55247Configure
35RTA100033510.0 x 6.00 x 35.00 0.250141 x 36 x 4 3 x 516.012.59.57.5321Configure
35RTA80007358.00 x 5.00 x 35.00 0.18811.51 x 36 x 4 3 x 55.54.03.02199Configure
35RTA80003358.00 x 5.00 x 35.00 0.25011.51 x 36 x 4 3 x 58.56.55.03.5258Configure
40RTA100074010.0 x 6.00 x 40.0 0.188141 x 36 x 4 3 x 58.56.54.53.5281Configure
40RTA100034010.0 x 6.00 x 40.0 0.250141 x 36 x 4 3 x 513.010.07.55.5366Configure
40RTA80003408.00 x 5.00 x 40.0 0.25011.51 x 36 x 4 3 x 56.04.53.02.5294Configure
45RTA100074510.0 x 6.00 x 45.00 0.188141 x 36 x 4 3 x 56.54.53.52315Configure
45RTA100034510.0 x 6.00 x 45.00 0.250141 x 36 x 4 3 x 510.57.56.04411Configure