RS - ROUND NON-TAPERED STEEL


[Pole Shaft]
The pole shaft is one piece construction, being fabricated from a weldable grade carbon steel structural tubing which has a uniform wall thickness of 11 gauge (0.1196") or 7 gauge (0.1793"). The pole shaft material shall conform to ASTM A-500 Grade C with a minimum yield strength of 50,000 psi. The pole shaft has a full length longitudinal resistance weld and is uniformly cylindrical in cross-section with round sides and excellent torsional properties.


[Anchor Bolts]
Anchor bolts are fabricated from commercial quality hot rolled carbon steel bar that meets or exceeds a minimum yield strength of 55,000 psi. Four properly sized anchor bolts, each with two regular hex nuts and washers, are furnished and shipped with all poles unless otherwise specified. Anchor bolts shall have the threaded end galvanized a minimum of 8 inches in accordance with ASTM A-153. Fully galvanized anchor bolts are available upon request.


[Base Plate]
The anchor base is fabricated from structural quality hot rolled carbon steel plate that meets or exceeds a minimum yield strength of 36,000 psi. The anchor base telescopes the pole shaft and is circumferentially welded top and bottom. All welds are performed in accordance with the American Welding Society specification AWS D1.1, latest edition.


[Handhole]
An oval reinforced gasketed handhole, having a nominal 2" x 4" or 3" x 5" inside opening, located 1'-6" above base, is standard on all poles. A grounding provision is located inside the handhole ring.


[Finish]
All exterior metal surfaces are mechanically cleaned to remove all oxides and contaminants prior to coating. The standard finish is a polyester thermosetting powder coating applied to the surface of the substrate to a minimum of 3 mils for all color finishes. Galvanizing is available upon request.













FINISH


   P - Primer
BK - Black Finish Color
BZ - Bronze Finish Color
GN - Green Finish Color
GY - Gray Finish Color
LA - Dark Natural Aluminum
LM - Natural Aluminum
G - Hot Dipped Galvanized
WH - White Finish Color
CT - Custom Color
G/BK - Black over Galvanized
G/BZ - Bronze over Galvanized
G/GN - Green over Galvanized
G/GY - Gray over Galvanized
G/LM - Natural Aluminum over galvanized
G/WH - White over Galvanized
G/CT - Custom over Galvanized



MOUNTING DESIGNATIONS


   OT - Open Top
PC - Pole Cap
2 - 2 3/8” OD Tenon
3 - 2 7/8” OD Tenon
3.5 - 3 1/2” OD Tenon
4 - 4” OD x 6” Tenon
DM - Drilled Mount
DM10 - Drilled for 1 Luminaire
DM29 - Drilled for 2 Luminaires at 90º
DM28 - Drilled for 2 Luminaires at 180º
DM39 - Drilled for 3 Luminaires at 90º
DM49 - Drilled for 4 Luminaires at 90º
WP - Wood Pole


* Standard location for DM10 is 90º to the right of the handhole.


OPTIONS


   XHH - Extra Handhole
WPRP - Festoon Opening
CPL - Threaded Coupling
NPL - Threaded Nipple
VDI - Vibration Damper Internal
BC - Base Cover
NC - Nut Covers
LAB - Less Anchor Bolt
EMB - Embedded Pole




SORT THE LIST BELOW BASED ON YOUR PREFERENCE BY CLICKING THE COLUMN TITLE

Height
(ft.)
Catalog Number Pole Shaft
(in.) x (ft.)
Shaft
Gauge
Bolt Circle
(in.)
Anchor Bolt
(in.) x (in.) x (in.)
Handhole Size
(in.)
80 MPH
(ft.²)
90 MPH
(ft.²)
100 MPH
(ft.²)
Ship Wt.
(lbs)
10RS40011104.00 x 10.01180.75 x 17 x 32 x 431241978
10RS45011104.50 x 10.01180.75 x 17 x 33 x 540312584
10RS50011105.0 x 10.011111.00 x 36 x 43 x 5514032139
12RS40011124.00 x 12.01180.75 x 17 x 32 x 428231973
12RS45011124.50 x 12.01180.75 x 17 x 33 x 534272196
12RS50011125.0 x 12.011111.00 x 36 x 43 x 5433327153
14RS40011144.00 x 14.01180.75 x 17 x 32 x 423191599
14RS45011144.50 x 14.01180.75 x 17 x 33 x 5282217108
14RS50011145.0 x 14.011111.00 x 36 x 43 x 5362822166
15RS40011154.00 x 15.01180.75 x 17 x 32 x 418141188
15RS45011154.50 x 15.01180.75 x 17 x 33 x 526201698
15RS50011155.0 x 15.011111.00 x 36 x 43 x 5332620173
15RS50007155.0 x 15.07111.00 x 36 x 43 x 5503931222
16RS40011164.00 x 16.01180.75 x 17 x 32 x 416131093
16RS45011164.50 x 16.01180.75 x 17 x 33 x 5241814120
16RS50011165.0 x 16.011111.00 x 36 x 43 x 5312419179
16RS50007165.0 x 16.07111.00 x 36 x 43 x 5473729232
18RS40011184.00 x 18.01180.75 x 17 x 32 x 413108103
18RS45011184.50 x 18.01180.75 x 17 x 33 x 5211612132
18RS50011185.0 x 18.011111.00 x 36 x 43 x 5272116192
18RS50007185.0 x 18.07111.00 x 36 x 43 x 5403125252
20RS40011204.00 x 20.01180.75 x 17 x 32 x 41186123
20RS45011204.50 x 20.01180.75 x 30 x 33 x 515129135
20RS50011205.00 x 20.011111.00 x 36 x 43 x 5201612189
20RS50007205.00 x 20.07111.00 x 36 x 43 x 5282218253
22RS40011224.00 x 22.01180.75 x 17 x 32 x 4753148
22RS45011224.50 x 22.01180.75 x 30 x 33 x 513107147
22RS50011225.00 x 22.011111.00 x 36 x 43 x 5171310202
22RS50007225.00 x 22.07111.00 x 36 x 43 x 5241915272
24RS40011244.00 x 24.01180.75 x 17 x 32 x 4753148
24RS45011244.50 x 24.01180.75 x 30 x 33 x 51086158
24RS50011245.00 x 24.011111.00 x 36 x 43 x 514118215
24RS50007245.00 x 24.07111.00 x 36 x 43 x 5201612292
25RS40011254.00 x 25.01180.75 x 17 x 32 x 4753148
25RS45011254.50 x 25.01180.75 x 30 x 33 x 51075164
25RS50011255.00 x 25.011111.00 x 36 x 43 x 513107221
25RS50007255.00 x 25.07111.00 x 36 x 43 x 5191511301
26RS45011264.50 x 26.01180.75 x 30 x 33 x 5964170
26RS50011265.00 x 26.011111.00 x 36 x 43 x 51297228
26RS50007265.00 x 26.07111.00 x 36 x 43 x 5181310311
28RS45011284.50 x 28.01180.75 x 30 x 33 x 5753182
28RS50011285.00 x 28.011111.00 x 36 x 43 x 51075240
28RS50007285.00 x 28.07111.00 x 36 x 43 x 515118330
30RS45011304.50 x 30.01180.75 x 30 x 33 x 5532193
30RS50011305.00 x 30.011111.00 x 36 x 43 x 5753253
30RS50007305.00 x 30.07111.00 x 36 x 43 x 51186349
35RS50007355.00 x 35.07111.00 x 36 x 43 x 5742397