SA - SQUARE STRAIGHT ALUMINUM


[Pole Shaft]
The pole shaft is a seamless 6063-T6 aluminum alloy extrusion having a uniform wall thickness of 0.250", 0.188", 0.156" or 0.125". The sides of the shaft may be drilled for mounting luminaire fixtures. All aluminum alloys shall comply with metallurgical and mechanical properties set forth in the Aluminum Association Standards.


[Anchor Bolts]
Anchor bolts are fabricated from commercial quality hot rolled carbon steel bar that meets or exceeds a minimum yield strength of 55,000 psi. Four properly sized anchor bolts, each with two regular hex nuts and washers, are furnished and shipped with all poles unless otherwise specified.


[Base Plate]
The anchor base is cast from A356 alloy aluminum. The anchor base telescopes the pole shaft and is circumferentially welded top and bottom. All welds are performed in accordance with the American Welding Society specification AWS D1.2, latest edition.


[Handhole]
An oval reinforced gasketed handhole, having a nominal 3" x 5" inside opening, located 1"-6" above base, is standard on all poles. A grounding provision is located inside the handhole ring.


[Finish]
All exterior metal surfaces are mechanically cleaned to remove all oxides and contaminants prior to coating. The standard finish is a polyester thermosetting powder coating applied to the surface of the substrate to a minimum of 3 mils for all color finishes.













FINISH


P - Primer
BK - Black Finish Color
BZ - Bronze Finish Color
GN - Green Finish Color
GY - Gray Finish Color
LA - Dark Natural Aluminum
LM - Natural Aluminum
WH - White Finish Color
CT - Custom Color



MOUNTING DESIGNATIONS


OT - Open Top
PC - Pole Cap
2 - 2 3/8” OD Tenon
3 - 2 7/8” OD Tenon
3.5 - 3 1/2” OD Tenon
4 - 4” OD x 6” Tenon
DM10 - Drilled for 1 Luminaire
DM - Drilled Mount
DM29 - Drilled for 2 Luminaires at 90º
DM28 - Drilled for 2 Luminaires at 180º
DM39 - Drilled for 3 Luminaires at 90º
DM49 - Drilled for 4 Luminaires at 90º
WP - Wood Pole


* Standard location for DM10 is 90? to the right of the handhole.


OPTIONS


XHH - Extra Handhole
WPRP - Festoon Opening
CPL - Threaded Coupling
NPL - Threaded Nipple
VDP - Vibration Damper Pads
BC - Base Cover
NC - Nut Covers
LAB - Less Anchor Bolt
EMB - Embedded Pole

A Vibration Damping Pad Assembly will be provided for
aluminum poles 20 feet or taller.



SORT THE LIST BELOW BASED ON YOUR PREFERENCE BY CLICKING THE COLUMN TITLE

Height
(ft.)
Catalog Number Pole Shaft
(in.) x (ft.)
Shaft Thickness
(in.)
Bolt Circle
(in.)
Anchor Bolt
(in.) x (in.) x (in.)
Handhole Size
(in.)
80 MPH
(ft.²)
90 MPH
(ft.²)
100 MPH
(ft.²)
110 MPH
(ft.²)
Ship Wt.
(lbs)
8SA40011084.00 x 8.00 0.12590.75 x 17 x 3 3 x 513.510.58.0730
10SA40011104.00 x 10.0 0.12590.75 x 17 x 3 3 x 510.58.06.04.534
12SA40011124.00 x 12.0 0.12590.75 x 17 x 3 3 x 58.06.54.52.538
14SA40011144.00 x 14.00 0.12590.75 x 17 x 3 3 x 56.55.03.51.543
15SA40011154.00 x 15.00 0.12590.75 x 17 x 3 3 x 56.04.53.00.545
16SA40011164.00 x 16.00 0.12590.75 x 17 x 3 3 x 55.54.02.5047
16SA40007164.00 x 16.00 0.18890.75 x 17 x 3 3 x 58.56.55.0265
18SA40011184.00 x 18.00 0.12590.75 x 17 x 3 3 x 54.03.02.0052
18SA40007184.00 x 18.00 0.18890.75 x 17 x 3 3 x 57.55.54.0172
18SA50007185.00 x 18.00 0.188111 x 36 x 4 3 x 512.59.57.02.589
20SA40007204.00 x 20.0 0.18890.75 x 17 x 3 3 x 56.04.53.0177
20SA50007205.00 x 20.0 0.188111 x 36 x 43 x 510.58.05.51.597
20SA60007206.00 x 20.0 0.18813.51 x 36 x 4 3 x 516.012.09.03.5121
20SA60003206.00 x 20.0 0.25013.51 x 36 x 4 3 x 522.517.013.06.5151
25SA50007255.00 x 25.00 0.188111 x 36 x 43 x 57.05.03.01118
25SA60007256.00 x 25.00 0.18813.51 x 36 x 4 3 x 511.58.05.52147
25SA60003256.00 x 25.00 0.25013.51 x 36 x 4 3 x 516.512.08.52185
30SA60007306.00 x 30.0 0.18813.51 x 36 x 4 3 x 58.05.03.00173
30SA60003306.00 x 30.0 0.25013.51 x 36 x 4 3 x 512.08.55.52219