Printer Friendly Version

HPRA - ROUND STRAIGHT ALUMINUM HINGED POLE


[Pole Shaft]
The pole shaft is a seamless 6063-T6 aluminum alloy extrusion having a uniform wall thickness of 0.250", 0.188", 0.156" or 0.125". The sides of the shaft may be drilled for mounting luminaire fixtures. All aluminum alloys shall comply with metallurgical and mechanical properties set forth in the Aluminum Association Standards.


[Anchor Bolts]
Anchor bolts are fabricated from commercial quality hot rolled carbon steel bar that meets or exceeds a minimum yield strength of 55,000 psi. Four properly sized anchor bolts, each with two regular hex nuts and washers, are furnished and shipped with all poles unless otherwise specified.


[Base Plate]
The anchor base is cast from A356 alloy aluminum. The anchor base telescopes the pole shaft and is circumferentially welded top and bottom. All welds are performed in accordance with the American Welding Society specification AWS D1.2, latest edition.


[Handhole]
An oval reinforced gasketed handhole, having a nominal 2" x 4" or 3" x 5" inside opening, located 1"-6" above base, is standard on all poles. A grounding provision is located inside the handhole ring.


[Finish]
All exterior metal surfaces are mechanically cleaned to remove all oxides and contaminants prior to coating. The standard finish is a polyester thermosetting powder coating applied to the surface of the substrate to a minimum of 3 mils for all color finishes.













FINISH


P - Primer
BK - Black Finish Color
BZ - Bronze Finish Color
GN - Green Finish Color
GY - Gray Finish Color
LA - Dark Natural Aluminum
BA - Brush Aluminum
LM - Natural Aluminum
WH - White Finish Color
CT - Custom Color



MOUNTING DESIGNATIONS


OT - Open Top
PC - Pole Cap
2 - 2 3/8 OD Tenon
3 - 2 7/8 OD Tenon
3.5 - 3 1/2 OD Tenon
4 - 4 OD x 6 Tenon
DM10 - Drilled for 1 Luminaire
DM - Drilled Mount
DM29 - Drilled for 2 Luminaires at 90º
DM28 - Drilled for 2 Luminaires at 180º
DM39 - Drilled for 3 Luminaires at 90º
DM49 - Drilled for 4 Luminaires at 90º
WP - Wood Pole


* Standard location for DM10 is 90 to the right of the handhole.


OPTIONS


XHH - Extra Handhole
WPRP - Festoon Opening
CPL - Threaded Coupling
NPL - Threaded Nipple
LAB - Less Anchor Bolt

A Vibration Damping Pad Assembly will be provided for
aluminum poles 20 feet or taller.



SORT THE LIST BELOW BASED ON YOUR PREFERENCE BY CLICKING THE COLUMN TITLE

Height
(ft.)
Catalog Number Pole Shaft
(in.) x (ft.)
Shaft Thickness
(in.)
Bolt Circle
(in.)
Anchor Bolt
(in.) x (in.) x (in.)
Handhole Size
(in.)
80 MPH
(ft.²)
90 MPH
(ft.²)
100 MPH
(ft.²)
110 MPH
(ft.²)
Ship Wt.
(lbs)
Select
20HPRA50011205.0 x 20.0 0.1257.5 - 90.75 x 30 x 33 x 54.53.01.51TBDConfigure
14HPRA40011144.0 x 14.00.1257.5 - 90.75 x 30 x 32 x 45.03.52.51TBDConfigure
12HPRA40011124.0 x 12.00.1257.5 - 90.75 x 30 x 32 x 46.55.03.52TBDConfigure
16HPRA50011165.0 x 16.00.1257.5 - 90.75 x 30 x 33 x 57.05.03.52TBDConfigure
18HPRA50009185.0 x 18.0 0.1567.5 - 90.75 x 30 x 33 x 57.55.54.02.5TBDConfigure
20HPRA50009205.0 x 20.0 0.1567.5 - 90.75 x 30 x 33 x 58.06.04.02.5TBDConfigure
10HPRA40011104.0 x 10.00.1257.5 - 90.75 x 30 x 32 x 48.56.54.53TBDConfigure
15HPRA50011155.0 x 15.00.1257.5 - 90.75 x 30 x 33 x 58.56.54.53.5TBDConfigure
16HPRA50009165.0 x 16.00.1567.5 - 90.75 x 30 x 33 x 59.07.05.03TBDConfigure
18HPRA50007185.0 x 18.0 0.1887.5 - 90.75 x 30 x 33 x 59.57.05.03TBDConfigure
12HPRA50011125.0 x 12.00.1257.5 - 90.75 x 30 x 33 x 510.58.46.04TBDConfigure
8HPRA40011084.0 x 8.00.1257.5 - 90.75 x 30 x 32 x 411.08.56.54.5TBDConfigure
16HPRA50007165.0 x 16.00.1887.5 - 90.75 x 30 x 33 x 511.08.56.54TBDConfigure
20HPRA60007206.0 x 20.0 0.1888.5-90.75 x 30 x 33 x 512.59.56.54.5TBDConfigure
10HPRA50011105.0 x 10.00.1257.5 - 90.75 x 30 x 33 x 513.510.58.06TBDConfigure