Printer Friendly Version

A94 - Pole Top Spoke Luminaire Adaptors


[Material]
The luminaire adaptor arms are fabricated from 2" schedule 40 pipe. The pipe is made from commercial grade hot rolled carbon steel. Pole top spoke luminaire adaptors shall be furnished with a removable top cap.


[Mounting Options & Configurations]
The pole tenon adaptor boot shall be available to fit either 2" or 3" schedule 40 pipe pole top tenons. Adaptors shall be manufactured with one, two, three or four light configurations. Adaptors with two luminaire mounts are available in a 90° configuration or 180° straight line. Adaptors with three luminaire mounts are available in a 90° and 120° configuration. The adaptor with four luminaire mounts is available in a 90° configuration. For catalog number logic, see chart below. For configurations, see depicted illustrations. Special adaptors with various arm length are readily available.


[Finish]
All exterior metal surfaces are mechanically cleaned to remove all oxides and contaminants prior to coating. The standard finish is a polyester thermosetting powder coating applied to the surface of the substrate to a minimum of 3 mils for all color finishes. Galvanizing is available upon request.











No. of Spokes Catalog Number Configuration Weight 100 MPH
(ft.²)
Select
1A94-1-10-18-2-(F)-210111Configure
2A94-2-90-18-2-(F)-290151Configure
3A94-3-90-18-2-(F)-290191Configure
4A94-4-90-18-2-(F)-290231Configure
3A94-3-120-18-2-(F)-2120191Configure
2A94-2-180-18-2-(F)-2180151Configure