Getting your brightest ideas off the ground®

COMPANY profile        standard        coating system       OUR commitment       Terms and Conditions       Warranty       ONLINE CATALOG       Contact Us RAS    Round Aluminum Smooth Pole Shaft The pole shaft is a seamless 6063-T6 aluminum alloy extrusion having a uniform wall thickness of 0.250", 0.188", 0.156" or 0.125". The sides of the shaft may be drilled for mounting luminaire fixtures. All aluminum alloys shall comply with metallurgical and mechanical properties set forth in the Aluminum Association Standards. Access Door: Located in base. Anchor Bolts Anchor bolts are fabricated from commercial quality hot rolled carbon steel bar that meets or exceeds a minimum yield strength of 55,000 psi. Four properly sized anchor bolts, each with two regular hex nuts and washers, are furnished and shipped with all poles unless otherwise specified. Finishes The Standard Finish is a polyester thermosetting powder coating applied to the surface of the substrate to a minimum of 3 mils for all color finishes. HOW TO ORDER When ordering, be sure to specify the complete catalog number. Our catalog numbers reflect the precise specifications of the item ordered to ensure our customers will receive the product which meets their exact requirements. The following explanation of the catalog numbers will be helpful in placing orders: CATALOG LOGIC - ORDERING SAMPLE Catalog Number Nominal Height Pole Shaft Thickness Base No. Anchor Bolt Bolt Circle 80 MPH 90 MPH 100 MPH Ship WT. RAS8-3.00-11 8 3.00 x 8.0 11 GA15 0.75 x 17 x 3 11 7.4 5.9 4.4 57 RAS8-4.00-11 8 4.00 x 8.0 11 GA15 0.75 x 17 x 3 11 11 8.9 6.3 63 RAS10-3.00-11 10 3.00 x 10.0 11 GA15 0.75 x 17 x 3 11 5.3 4 3.2 60 RAS10-4.00-11 10 4.00 x 10.0 11 GA15 0.75 x 17 x 3 11 10 7.9 6.1 66 RAS12-3.00-11 12 3.00 x 12.0 11 GA15 0.75 x 17 x 3 11 4 2.9 2.1 64 RAS12-4.00-11 12 4.00 x 12.0 11 GA15 0.75 x 17 x 3 11 6.5 4.8 3.6 71 RAS12-4.00-7 12 4.00 x 12.0 7 GA15 0.75 x 17 x 3 11 8 6 4.5 80 RAS14-4.00-11 14 4.00 x 14.0 11 GA15 0.75 x 17 x 3 11 5.8 4.4 3.3 76 RAS14-4.00-7 14 4.00 x 14.0 7 GA15 0.75 x 17 x 3 11 6.5 4.7 3.3 85 Catalog Number Nominal Height Pole Shaft Thickness Base No. Anchor Bolt Bolt Circle 80 MPH 90 MPH 100 MPH Ship WT. RAS8-4.00-11 8 4.00 x 8.0 11 MA17 0.75 x 17 x 3 11.5 10 7.6 6 73 RAS10-4.00-11 10 4.00 x 10.0 11 MA17 0.75 x 17 x 3 11.5 8.4 6.3 4.8 76 RAS10-5.00-9 10 5.00 x 10.0 9 MA17 0.75 x 17 x 3 11.5 13 10 7.7 89 RAS12-4.00-11 12 4.00 x 12.0 11 MA17 0.75 x 17 x 3 11.5 5.5 4.8 3.6 80 RAS12-4.00-7 12 4.00 x 12.0 7 MA17 0.75 x 17 x 3 11.5 8 6 4.5 89 RAS12-5.00-9 12 5.00 x 12.0 9 MA17 0.75 x 17 x 3 11.5 11.5 9 7 94 RAS14-4.00-11 14 4.00 x 14.0 11 MA17 0.75 x 17 x 3 11.5 4.7 3.4 2.4 84 RAS14-4.00-7 14 4.00 x 14.0 7 MA17 0.75 x 17 x 3 11.5 6.5 4.7 3.3 95 RAS14-5.00-9 14 5.00 x 14.0 9 MA17 0.75 x 17 x 3 11.5 10 7.6 5.6 101 RAS16-5.00-9 16 5.00 x 16.0 9 MA17 0.75 x 17 x 3 11.5 8 5.9 4.2 107 RAS16-4.00-7 16 4.00 x 16.0 7 MA17 0.75 x 17 x 3 11.5 4.6 3.2 2.2 103 RAS18-5.00-9 18 5.00 x 18.0 9 MA17 0.75 x 17 x 3 11.5 6.3 4.2 2.7 112 Catalog Number Nominal Height Pole Shaft Thickness Base No. Anchor Bolt Bolt Circle 80 MPH 90 MPH 100 MPH Ship WT. RAS8-4.00-11 8 4.00 x 8.0 11 PA10 0.75 x 17 x 3 7 10 7.6 6 76 RAS10-4.00-11 10 4.00 x 10.0 11 PA10 0.75 x 17 x 3 7 8.4 6.3 4.8 79 RAS10-5.00-9 10 5.00 x 10.0 9 PA10 0.75 x 17 x 3 7 13 10 7.7 89 RAS12-4.00-11 12 4.00 x 12.0 11 PA10 0.75 x 17 x 3 7 6.5 4.8 3.8 83 RAS12-4.00-7 12 4.00 x 12.0 7 PA10 0.75 x 17 x 3 7 8 6 4.5 83 RAS12-5.00-9 12 5.00 x 12.0 9 PA10 0.75 x 17 x 3 7 11.5 9 7 94 RAS14-4.00-11 14 4.00 x 14.0 11 PA10 0.75 x 17 x 3 7 4.7 3.4 2.4 86 RAS14-4.00-7 14 4.00 x 14.0 7 PA10 0.75 x 17 x 3 7 6.5 4.7 3.3 95 RAS14-5.00-9 14 5.00 x 14.0 9 PA10 0.75 x 17 x 3 7 10 7.6 5.6 100 RAS16-5.00-9 16 5.00 x 16.0 9 PA10 0.75 x 17 x 3 7 8.2 6 4.2 106 RAS16-4.00-7 16 4.00 x 16.0 7 PA10 0.75 x 17 x 3 7 4.6 3.2 2.2 103 RAS18-5.00-9 18 5.00 x 18.0 9 PA10 0.75 x 17 x 3 7 6.2 4.3 3 112 Catalog Number Nominal Height Pole Shaft Thickness Base No. Anchor Bolt Bolt Circle 80 MPH 90 MPH 100 MPH Ship WT. RAS8-3.00-11 8 3.00 x 8.0 11 WA13 0.75 x 17 x 3 9 6.3 4.7 3.2 45 RAS8-4.00-11 8 4.00 x 8.0 11 WA13 0.75 x 17 x 3 9 10 7.9 6.3 49 RAS10-3.00-11 10 3.00 x 10.0 11 WA13 0.75 x 17 x 3 9 4.2 3.2 2.3 48 RAS10-4.00-11 10 4.00 x 10.0 11 WA13 0.75 x 17 x 3 9 8.4 6.3 4.8 53 RAS10-4.00-7 10 4.00 x 10.0 7 WA13 0.75 x 17 x 3 9 10 8 6.2 61 RAS12-3.00-11 12 3.00 x 12.0 11 WA13 0.75 x 17 x 3 9 3 2.1 1.4 50 RAS12-4.00-11 12 4.00 x 12.0 11 WA13 0.75 x 17 x 3 9 6.3 4.5 3.4 57 RAS12-4.00-7 12 4.00 x 12.0 7 WA13 0.75 x 17 x 3 9 8 6 4.5 67 RAS14-4.00-11 14 4.00 x 14.0 11 WA13 0.75 x 17 x 3 9 4.6 3.3 2.2 62 Catalog Number Nominal Height Pole Shaft Thickness Base No. Anchor Bolt Bolt Circle 80 MPH 90 MPH 100 MPH Ship WT. RAS10-4.00-11 10 4.00 x 10.0 11 WA17 0.75 x 17 x 3 12 6.7 5 3.8 68 RAS10-5.00-9 10 5.00 x 10.0 9 WA17 0.75 x 17 x 3 12 8.4 6.5 4.9 77 RAS12-4.00-11 12 4.00 x 12.0 11 WA17 0.75 x 17 x 3 12 6.5 4.8 3.6 72 RAS12-4.00-7 12 4.00 x 12.0 7 WA17 0.75 x 17 x 3 12 8 6 4.6 72 RAS12-5.00-9 12 5.00 x 12.0 9 WA17 0.75 x 17 x 3 12 14.2 10.7 8.4 83 RAS14-4.00-11 14 4.00 x 14.0 11 WA17 0.75 x 17 x 3 12 4.7 3.4 2.4 76 RAS14-4.00-7 14 4.00 x 14.0 7 WA17 0.75 x 17 x 3 12 6.5 4.7 3.3 86 RAS14-5.00-9 14 5.00 x 14.0 9 WA17 0.75 x 17 x 3 12 10 7.6 5.6 90 RAS16-4.00-11 16 4.00 x 16.0 11 WA17 0.75 x 17 x 3 12 3.5 2.1 1.4 78 RAS16-4.00-7 16 4.00 x 16.0 7 WA17 0.75 x 17 x 3 12 4.6 3.2 2.2 91 RAS16-5.00-9 16 5.00 x 16.0 9 WA17 0.75 x 17 x 3 12 8 5.9 4.2 94 RAS18-5.00-9 18 5.00 x 18.0 9 WA17 0.75 x 17 x 3 12 6.3 4.2 2.7 101 FINISHES       Standard   BRZ     Bronze     BLK     Black     GRY     Gray     GRN     Green     WHT     White     P     Primed     NA     Natural Aluminum            K-KLAD   K813     Bronze     K821     Black     K841     Gray     K891     Green     K881     White     K845     Natural Aluminum         1 YEAR WARRANTY   5 YEAR WARRANTY  MOUNTING DESIGNATIONS    Tenon Mount   3     2 7/8" x 2 7/8" TENON     4     2 7/8" x 4" TENON           Side Mount   SM10     For 1 Luminaire     SM2090     For 2 Luminaire @ 90º *     SM2180     For 2 Luminaire @ 180º *     SM3090     For 3 Luminaire @ 90º *     SM3120     For 3 Luminaire @ 120º *     SM4090     For 4 Luminaire @ 90º *        OPTIONS    Banner Arms   3BA1000     3" Pole Diameter with Single Banner Arm     3BA2180     3" Pole Diameter with Double Banner Arm 180º apart     4BA1000     4" Pole Diameter with Single Banner Arm     4BA2180     4" Pole Diameter with Double Banner Arm 180º apart     5BA1000     5" Pole Diameter with Single Banner Arm     5BA2180     5" Pole Diameter with Double Banner Arm 180º apart           Finials   FA3     3" Top Acorn     FA4     4" Top Acorn     FA5     5" Top Acorn     FB3     3" Top Ball     FB4     4" Top Ball     FB5     5" Top Ball     FS3     3" Top Spike     FS4     4" Top Spike     FS5     5" Top Spike           Accessories   CPL     Threaded Coupling     FLH     Flag Holder     NPL     Threaded Nipple     PLH     Plant Holder     LAB     Less Anchor Bolt        BASE STYLES       GA15     Georgetown 15" round     MA17     Manhattan 17" round     PA10     Philadelphia 10" x 10" octagonal     WA13     Washington 13" round     WA17     Washington 17" round        KW INDUSTRIES, INC. was founded over 30 years ago to exclusively design and manufacture lighting standards. KW continues this business philosophy with the introduction of its Designer Series of decorative bases and lighting poles. SUPERIOR FINISHES - KW Industries, an innovator in powder coatings and applications, will offer its exclusive K-KLAD Coating System as an optional finish with Designer Series. SUPERIOR SHAFTS AND BASES - Low copper, pure aluminum alloys provide lightweight, high-strength, corrosion-resistant bases and shafts. Steel shafts coupled with wraparound aluminum and cast iron clamshell bases provide strength, height and durability. SUPERIOR SERVICE - The unmatched customer service of KW stands behind Designer Series products.